Kogan KAPWDBIDETA User Manual page 19

Child wash:
A warm water gentle cleansing suitable for children. Whilst in standby press the "Child
wash" button. The front wash nozzle extends out with nozzle position at the front. The water
pressure is low and the temperature is set at 36°C. This operation automatic ends after 30
seconds or when the user presses the "Stop" button.
One solution:
Pressing "One solution" button will start the following operations in the order shown below:
•
Rear wash for 40 seconds
•
Oscillate wash for 20 seconds
•
Warm air dryer for 2 minutes
The user can end the operation at any time by pressing the "Stop" button.
Strong wash:
Whilst in standby, press "Strong wash" button. The rear wash nozzle extends oand the water
pressure will be set to the highest mode. This operation automatic ends after 2 minutes or
when the user presses the "Stop" button.
Indicator Panel
•
Power: When the power is on, the indicator turns on. If there is something wrong
with flushing components, the indicator light will blink.
•
Water: When the water is heating, the indicator light is on. If it is over heated, the
indicator light will blink.
•
Seat: When the toilet seat is heating, the indicator light is on. If it is over heated,
the indicator light will blink.
•
Sitting: When the toilet seat detects a person, the indicator light is on.
•
Save Power: When it enters energy saving mode, the indicator light is on.