Related Manuals for Kogan KASMABIDETA
Summary of Contents for Kogan KASMABIDETA
- Page 1 KOGAN SMARTERHOME™ SMART ANTIBACTERIAL WASH & DRY ELECTRIC BIDET TOILET SEAT KASMABIDETA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read all instructions before use, and retain this user guide for future reference. Read all following safety precautions carefully before use. All images within this user guide are for reference only, refer to the actual product. Symbols on the product and in this user guide: Warning: Failure to follow instructions with this symbol may result WARNING! in serious injury or death. - Page 4 Fall out of the cushion • The continued used of the product, by ignoring the above faults, may result in fire, electric shock, heat, short circuit, injury and indoor water seepage. • Do not use any type of water except tap water or drinkable well water (underground water).
- Page 5 • When removing the plug from wall outlet, remove by holding the plug. Do not pull on the cord. • If the power soft wire is broken, cease use immediately and contact Kogan.com for replacement or repair. • Turn off the power before doing any general maintenance or spot checks. Nozzle clean will require power to check.
- Page 6 • Confirm that the filter is screwed to correct position installed, prior to using. It may cause water leakage if not screwed tight. • When the toilet drain outlet is blocked, cut off the power then clean the obstruction. Otherwise sewage may overflow, causing indoor water seepage because of auto flush function.
- Page 7 COMPONENTS Ensure you have all of the components listed in this user guide before disposing of any packaging. • • x1 Toilet Seat x1 Filter (Back up) • x1 User Guide • x1 Front Wash Nozzle (Back up) • x1 Spanner •...
- Page 8 OVERVIEW Toilet lid Damper Water inlet Dryer outlet Control panel Nozzle for rear wash Heated seat Nozzle for front wash Cushion pad...
-
Page 9: Components For Installation
Components for installation: PE Intel Pipe Gasket (x2) Spanner T Valve with Filter Fix bracket Mounting bolts Rubber sleeves Metal gasket (x2) (x2) (x2) -
Page 10: Functions Overview
Functions overview: Function Description Rear wash Provide rear cleansing Rear oscillating Move the nozzle back and forth for rear cleansing wash Provide cleansing by front cleansing nozzle with a gentle Front wash spray Front oscillating Move the nozzle back and forth with a gentle spray wash One solution Auto rear clean and dry... -
Page 11: Installation
INSTALLATION Precautions before Installation • Before installation, ensure toilet wall, floor tile, ceramic toilet has been completed, bathroom should supply water and power socket nearby toilet. • Water pressure should be between 0.06Mpa (flow) - 0.75MPa (Static), water temperature 5°C - 35°C. •... - Page 12 Toilet Seat Installation Bolt Remove original toilet seat Toilet • Loosen bolts with wrench Seat Gasket • Remove the nut and gasket, remove the toilet seat Release Install fix bracket • Before the installation, please put the product on the toilet bowl to check for correct fitting.
- Page 13 Install bidet Aim the bottom card slot of the seat to the edge of fixed bracket, slide in gently. You will hear a “click” sound when it is correctly Fix bracket placed. Ensure the bidet fits into the area before Bidet placing, then lift bidet to fit it on correct position.
-
Page 14: Operation
OPERATION Preparation Open the water-inlet valve. Ensure the plug is inserted into socket and the indicator light is on. Confirm the power icon in LED display is on. Power If the power light on the product indicator panel is not lit, all functions will be unavailable. -
Page 15: Control Panel
Control panel Stop the current cleaning operation. If do not press stop button, rear washing/ Stop front washing will stop automatically after 2 minutes Press Front, nozzle reaches out to work; Press again change to front oscillating Front cleansing, nozzle repeatedly swings back or front. Press again to stop oscillating cleansing, Switch back to front wash. - Page 16 Cleansing suitable for menstruation. In Idle mode, press this button to begin function. The nozzle reaches out to work and water temp is set to the highest 9. “Lady care” level (39°C), water pressure is set to 2-level, cleaning position set as default. Water temp/water pressure not adjustable, cleaning position is adjustable in this mode, automatic ends after cleaning for 2 mins.
- Page 17 Install App Download the “Kogan SmarterHome” app from the Play Store (Android) or App Store (iOS). Register If you do not have a Kogan SmarterHome™ account, register or sign in with a verification code sent by SMS. To register: Tap to enter registration page.
- Page 18 Set device in pairing mode When the device is first turned on, it may automatically enter pairing mode (making a “beep” sound). If not automatically in pairing mode when powered on, you can manually set the device in pairing mode by long-pressing the Drying and Rear Wash buttons simultaneously until you hear a prompt tone (beep).
- Page 19 Upon successfully confirming pairing mode, enter your Wi-Fi details. It is important that your SmarterHome™ device and the app are connected to the same Wi-Fi network during setup. The device will commence the pairing process and connect to the app. Ensure your Wi-Fi router, mobile phone, and the SmarterHome™...
- Page 20 App functions Adjust seat Adjust water temperature temperature Warm air to make the cleaned part dry Rear clean wash “Lady care” Nozzle clean Indicates the position of the toilet when the light is insufficient Energy Saving Remove odour when using (ECO mode) •...
- Page 21 Rear wash, front wash, automatic wash, dry operation page On this page, you can adjust the water temperature, wind temperature, nozzle position, water pressure intensity. Press stop button to immediately end wash or dry.
-
Page 22: Cleaning And Care
CLEANING & CARE Toilet bowl cleaning • Please make sure the electrical plug is switched off and removed prior to cleaning. • Please use damp, soft cloth to wipe the toilet shelf and seat. Dirt should be cleaned as soon as possible. If it's difficult to clean, you can use neutral detergent. Nozzle Cleaning and Maintenance •... - Page 23 Cleaning the filter When the water pressure is too low or insufficient, please clean the filter. Close the angle valve and stop water supply Note: Do not remove the filter without closing the angle valve, otherwise water will spray out. Remove the filter in T valve.
- Page 24 Clean the filter Remove the filter and clean it thoroughly. Flush off dirt or clean the filter by toothbrush. Note: • Do not use any cleaning agents. Clean it with water only. • Do not use excessive force when cleaning, otherwise the filter will be deformed or damaged, affecting normal use.
-
Page 25: Specifications
SPECIFICATIONS Ambient temp range 4°C-40°C Inlet water temp range 5°C-35°C Rated voltage AC~220V-240V 50Hz at 5°C inlet water temp; maximum outlet water temp and strength. Max power 1680W Inlet water temp: 15°C ± 0.5°C Rated power 1520W Power cord length 1.5m Water pressure 0.06MPa (dynamic) - 0.75MPa (static) -
Page 26: Troubleshooting
Seat does not heat incorrect or the product is in Readjust temperature power saving mode Seat and cover are loose Fixed bolts are loose Tighten the bolts No response when Reboot or contact Kogan.com Key fault pressing the key for assistance... - Page 27 NOTES...
- Page 28 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...