inflammation due to poor water quality. It may cause fire or overheating if the power
supply is always connected.
• Confirm that the filter is screwed to correct position installed, prior to using. It may cause
water leakage if not screwed tight.
• When the toilet drain outlet is blocked, cut off the power then clean the obstruction.
Otherwise sewage may overflow, causing indoor water seepage because of auto flush
function.
• Flush the toilet after each use. Failure to do so may result in difficulty cleaning the toilet,
blocked drain outlet or sewage overflow, resulting in indoor water seepage.
• After each use, if there is any mess on floor, always clean immediately to prevent corrosion
or unhygienic build-up.
• Extended heating without sufficient water supply will lead to the heater becoming burned.
• Directly exposing the remote control to water may cause the remote to cease functioning.