Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Kogan KAWNDBIDETB
Summary of Contents for Kogan KAWNDBIDETB
- Page 1 SMART WASH & DRY ELECTRIC BIDET TOILET SEAT KAWNDBIDETB...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS Read all instructions before use and retain this user guide for future reference. Read all following safety precautions carefully before use. All images within this user guide are for reference only, refer to the actual product. Symbols on the product and in this user guide: Warning: Failure to follow instructions with this symbol may result WARNING! in serious injury or death. - Page 4 • If the product is not working, stop using immediately. • Under the following conditions, immediately disconnect the power supply and turn off the water angle valve: Water leakage from pipe or inside of the product Crack or damage on the product Unusual sound or smell Smoke Unusual heating...
- Page 5 • When removing the plug from wall outlet, remove by holding the plug. Do not pull on the cord. • If the power soft wire is broken, cease use immediately and contact Kogan.com for replacement or repair. • Turn off the power before doing any general maintenance or spot checks. Nozzle clean will require power to check.
- Page 6 • Close the angle valve when water leaking • When room temperature is below 0°C, to avoid piping or soft hose damage, anti-freezing measures should be adopted. If water Inlet soft hose is frozen it may destroy main body or piping, leading to water leakage.
- Page 7 DIMENSIONS...
- Page 8 COMPONENTS Ensure you have all of the components listed in this user guide before disposing of any packaging. Bidet User guide Spare front nozzle Spare rear nozzle PE inlet pipe Rubber gasket Spanner T-valve with filter Mounting bolts Rubber sleeves Metal gasket Seat bracket (x2)
- Page 9 OVERVIEW Seat lid Cushion pad Deodorizing box (inside) Damper Dryer outlet Control panel Seat sensor Rear wash nozzle Seat Front wash nozzle Note: Ensure the screen protector is removed prior to first use.
-
Page 10: Installation
INSTALLATION Precautions before Installation • Before installation, ensure toilet wall, floor tiles and ceramic toilet have all been installed. Your bathroom should have water supply and power socket nearby toilet. • Water pressure should be between 0.06Mpa (flow) - 0.75MPa (Static) and water temperature between 5°C - 35°C. - Page 11 2. Bidet Installation Bolt Remove original toilet seat: • Loosen bolts with the spanner. Toilet • Remove the nut and gasket. seat Gasket • Remove the toilet seat. Nuts Installing the seat bracket: • Before the installation, place the product on the toilet bowl to check for correct fitment.
- Page 12 Installing the bidet: • Aim the bottom card slot of the seat to the edge of seat bracket, slide in gently. You will Seat hear a “click” sound when it is correctly bracket placed. Bidet • Ensure the bidet fits into the area before placing, then lift bidet to fit it in correct position.
-
Page 13: Operation
OPERATION Preparation Ensure the plug is inserted into the power socket then press the reset button on the residual current device (RCD). The indicator turns from black to slightly red. Open the water-inlet valve. Confirm the power icon LED is on. Power If the power light on the product indicator panel is not lit, all functions will be unavailable. -
Page 14: Control Panel
Control panel Button Functions Stop the current cleaning operation. If not pressed, rear washing/ front washing Stop will stop automatically after 2 minutes Press Front, nozzle extends out to work; Press again change to front oscillating Front cleansing, nozzle repeatedly swings back and forth. Press again to stop oscillating cleansing, Switch back to front wash. - Page 15 Warm water gentle cleaning, suitable for children. In Idle mode, press this button to enter function. The nozzle extends out to work and nozzle position will be at the front (5 level), mini water pressured level) and the water temp is 10.
-
Page 16: Cleaning And Care
CLEANING & CARE Toilet bowl cleaning • Ensure the power is switched off at the power outlet and plug removed prior to cleaning. • Use a damp, soft cloth to wipe the toilet shelf and seat. Dirt should be cleaned as soon as possible. - Page 17 Cleaning the filter When the water pressure becomes low or insufficient, the filter will need to be cleaned. Close the water inlet valve to stop the water supply. Note: Do not remove the filter without closing the valve. Otherwise, water will spray out. Remove the T-valve filter: Unscrew the connector using a spanner and then remove the filter.
- Page 18 Clean the filter: Remove the filter and clean it thoroughly. Rinse off dirt or clean the filter with a toothbrush. Note: • Do not use any cleaning agents. Clean it with water only. • Do not use excessive force when cleaning, otherwise the filter will be deformed or damaged, affecting normal use.
-
Page 19: Specifications
SPECIFICATIONS Rated voltage AC 220-240V, 50Hz Power consumption 1520W (When inlet water temp is 15˚ and the outlet temp and pressure is set to maximum.) Power cord length 1.5m Dimensions 508 x 444 x 159mm Safety devices Over-heating protection, water and electrical isolation, Temp reset switch, over-dried protection. -
Page 20: Troubleshooting
Tighten the bolts. loose. No response when Reboot or contact Key fault. pressing the key. Kogan.com for assistance. Check whether the water supply to bidet is normal. Product ‘Buzz’ three The heater has entered self- Disconnect the power and times and then turns off. - Page 21 NOTES...
- Page 24 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...