SAFETY & WARNINGS Keep these instructions for future reference. WARNING: • NEVER leave children unattended. • Use only on a flat surface. • DO NOT use on an elevated surface. • NEVER use the training seat on full-size toilet. • NEVER lift or carry the product with a child on it.
Page 4
COMPONENTS A x 2 B x 1 Sound Module Screws (2) Tank Screw (1) Potty Base Non-slip Treads Potty Seat Tank Sound Module Tank Lid Splash Guard...
Page 5
ASSEMBLY Step 1: Remove sound module screws from plastic bag. Immediately the discard bag. Slide the sound module into the tank lid and fasten securely with screws. Step 2: Remove the tank screw from the potty base. Attach the tank to the potty base using the tank screw.
Page 7
Battery Replacement Using a Phillips head screwdriver, open the battery compartment and insert 2 "AAA" batteries. Close and refasten the battery compartment door.
OPERATION Place the potty on a non-elevated, flat surface. Sit the child squarely on the potty seat. Press the handle to activate sound.
Page 9
Life seat and remove pot to empty contents. The upper lid lifts for storage of travel size wipes (not included). Note: The inside of the tank can be used to store books, wipes, or other potty-training essentials.
Page 10
Lift the seat, align the ridges on the splash guard with those on the inner seat & slide upwards. The seat can be unhinged for cleaning. Note: Never use the training seat on a full-size toilet.
Never use this product if there are any loose or missing fasteners, loose joints, broken parts or if it is damaged. • Check product before assembly and periodically during use. Contact kogan.com if any of the above faults are observed. •...
Page 12
Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...