Kogan KAPWDBIDETA User Manual page 5

Smart wash & dry electric bidet toilet seat
Hide thumbs Also See for KAPWDBIDETA:
Table of Contents

Advertisement

• Ensure the plug is firmly inserted into the wall outlet at all times, or it may cause fire, heat
or short circuit.
• When removing the plug from wall outlet, remove by holding the plug. Do not pull on the
cord.
• If the power soft wire is broken, cease use immediately and contact Kogan.com for
replacement or repair.
• Turn off the power before doing any general maintenance or spot checks. Nozzle clean will
require power to check.
• People in need of supervision or a guardian (people with disability, children, older people)
must not be left unattended with the device.
• Do not let children play this product.
• Do not throw lit cigarettes, matches, or any other flaming material into the toilet.
General safety notices:
• Do not use the product when it is loosely fitted. The toilet and seat may separate and fall
off, causing body injury.
• If damaged, do not touch broken area. Cease use and contact kogan.com for assistance.
• Do not impact forcefully, put heavy weight upon, crouch on, or stand on the product. This
may cause product damage, personal injury, or indoor water seepage.
• Do not use the seat for anything other than what it was designed for. Do not pull the
product by holding the seat or cover, and do not attempt to sit on it while it is not in
position. Failure to do so result in product damage or injury.
• Use kitchen detergent (neutral) to clean the plastic parts (seat cover, etc) and water inlet
soft hose. Do not use the following materials: bathroom detergent, house detergent,
petrol, banana oil, cleaning powder, nylon brushes, etc. These products may damage the
plastic parts, cause cracks, or may cause water leakage because of damaged soft hose.
• To avoid sudden water leakage, do not remove the water inlet filter when angle valve is
open. Refer to Cleaning and Care section of this user guide.
• Do not crush or bend water inlet hose, as it may cause water leakage.
• If replacing another bidet, use the new hose supplied with this product. Do not reuse the
previous hose, as it may cause water leakage.
• Do not pour hot water into toilet, as it may cause body injury or indoor water seepage due
to toilet damage.
• Do not flush with large amount of toilet paper or other subjects except sewage and small
amount toilet paper, as it may cause toilet damage. Do not flush tampons, condoms, or
sanitary products.
• Do not lean on the toilet cover while using, it may damage the seat cover.
• Close the angle valve when water leaking
• When room temperature is below 0°C, to avoid piping or soft hose damage, anti-freezing
measures should be adopted. If water Inlet soft hose is frozen it may destroy main body or
piping, leading to water leakage. To avoid damage, please pay attention to room
temperature adjustment.
• When not use for a long time, drain the inlet soft hose and disconnect from power. When
next using, open the angle valve and let water connect first, or it may cause skin

Advertisement

Table of Contents
loading

Table of Contents