Kogan KAPWDBIDETA User Manual page 11

2. Toilet Seat Installation
Remove original toilet seat
•
Loosen bolts with wrench
•
Remove the nut and gasket,
remove the toilet seat
Install fix bracket
•
Before the installation, place the product on the toilet bowl to check for correct
fitting.
•
Embed and install the rubber sleeve, fix bracket, metal bracket as shown below.
•
Insert the mounting bolt and tighten it so that the fix bracket cannot move.
•
If the product does not match the toilet bowl ideally, loosen the mounting bolts,
remove the metal gasket, readjust the position of the fix bracket, then replace the
metal gasket and tighten the bolts.
The fix bracket can adjust the range between 130-170mm.
Bolt
Gasket
Nuts
Release
Mounting bolts
Metal bracket
Fix bracket
Rubber sleeves
Toilet
seat