Kogan KAPWDBIDETA User Manual page 18

Water temperature adjustment:
The water temperature can be adjusted between 4 different levels. Press the "Water temp"
button to cycle through the preset temperatures. The number indicators will display the
current setting as shown below:
Room temperature
(No indicator)
Night light:
Press the "Night light" button whilst in standby; the #4 indicator will blink and the light will
turn on. Pressing the button again will turn off the light.
Seat temperature adjustment:
The seat temperature can be adjusted between 4 different levels. Press the "Seat temp"
button to cycle through the preset temperatures. The number indicators will display the
current setting as shown below:
Room temperature
(No indicator)
Note: To prevent the low temp burn, the temperature will automatically reduce to below
35°C after sitting on the seat for 10 minutes.
Power saving:
Press the "Power saving" button whilst in standby; the #3 indicator will blink and toilet seat
will go into power saving mode. Pressing the button again will cancel the operation.
Deodoriser:
The deodoriser feature is on by default. During drying, the deodorising function is
temporarily stopped, and it will automatically resume after the drying is completed. When a
person leaves the seat, the deodorising function will continue to work automatically after 90
seconds.
To disable the feature, press the "Deodoriser" button whilst in standby; the indicator #2 will
blink. The deoderiser is now switch off. Press the button again to turn the feature back on.
Lady care:
Cleansing suitable for menstruation. Whilst in standby, press the "Lady care" button to
begin operation. The nozzle extends out to and water temp is set to the highest level (39°C).
Water temperature and pressure is not adjustable however the nozzle position can be
adjusted to suit your needs. This operation automatic ends after 2 minutes or when the user
presses the "Stop" button.
39°C
(#1)
39°C
(#4)
36°C
33°C
(#3)
(#2)
36°C
33°C
(#6)
(#5)