Table of Contents
Advertisement
You can ground the router in one of the following ways, depending on the grounding conditions at
the installation site:
•
Ground the router to a properly-grounded grounding strip.
Ground the router to a grounding conductor buried in the earth.
•
Grounding the router with a grounding strip
To connect the grounding cable:
1.
Remove the grounding screw from the rear panel of the router chassis.
2.
Put the OT terminal of the supplied grounding cable on the grounding screw, as shown
in
Figure
Use a screwdriver to fasten the grounding screw, with the grounding cable OT terminal
3.
attached, to the grounding screw hole.
4.
Attach the other end of the grounding cable to the grounding strip, as shown in
Figure 16 Connecting the grounding cable to the router
(1) Grounding screw
(3) Grounding hole
Figure 17 Connecting the grounding cable to a grounding strip
(1) Hex nut
(3) Naked metal part
(5) Grounding strip
16.
(2) OT terminal
(4) Grounding cable
(2) Grounding cable
(4) Grounding post
14
Figure
17.
Advertisement
Table of Contents
