Table of Contents
Advertisement
DS-K1T673 Series Face Recognition Terminal User Manual
Note
You can also change the settings in System Settings.
●
If you install the device indoors near the window or the face recognition function is not
●
working well, select Others.
If you do not configure the application mode and tap Next, the system will select Indoor by
●
default.
If you activate the device via other tools remotely, the system will select Indoor as the
●
application mode by default.
6.3 Privacy Settings
After activation, selecting application mode, and selecting network, you should set the privacy
parameters, including the picture uploading and storage.
Select parameters according to your actual needs.
Figure 6-3 Privacy
37
Advertisement
Table of Contents
