You can set the interval between 2 continuous recognition of a same person during the
authentication. In the configured interval, Person A can only recognized once. If another person
(Person B) has recognized during the interval, Person A can recognized again.
8.3.13 Privacy Policy Settings
You can set privacy policy for the device.
Before You Start
Only single-screen devices support privacy policy settings.
Steps
1. Click Configuration → General → Privacy .
2. Click to Apply Privacy Protocol Terms File.
3. Click
and select the privacy policy file.
Note
The supported file format is TXT or HTML, and shall be no larger than 120 kb.
4. Optional: Click Import to import the privacy protocol file.
5. Optional: Click Delete to delete the privacy protocol file.
6. Click Save.
8.3.14 Set Biometric Parameters
Set Basic Parameters
Click Configuration → Smart → Smart .
DS-K5032 Series Visitor Terminal User Manual
Figure 8-10 Privacy Policy
69