HIKVISION DS-K1T690 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Touch terminals
  5. DS-K1T690 Series
  6. User manual

HIKVISION DS-K1T690 Series User Manual

Face recognition terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T690 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T690 Series and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for HIKVISION DS-K1T690 Series

Summary of Contents for HIKVISION DS-K1T690 Series

  • Page 1 DS-K1T690 Series Face Recognition Terminal User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K1T690 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1T690 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T690 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 DS-K1T690 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T690 Series Face Recognition Terminal User Manual Cautions: Do not drop the device or subject it to physical shock, and do not expose it to high ● electromagnetism radiation. Avoid the equipment installation on vibrations surface or places subject to shock (ignorance can cause equipment damage).
  • Page 9 DS-K1T690 Series Face Recognition Terminal User Manual Available Models Product Name Model Wireless Description Face Recognition Terminal DS-K1T690MF 13.56MHz + Bluetooth DS-K1T690MF-X 13.56MHz + Bluetooth DS-K1T690M-T 13.56MHz + Bluetooth DS-K1T690M-E1 13.56MHz + Bluetooth DS-K1T690MW 13.56 MHz + 2.4 G Wi-Fi +...

  • Page 10: Table Of Contents

    DS-K1T690 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 2 Chapter 3 Installation ......................... 5 3.1 Installation Environment ......................5 3.2 Flush Mounting with Gang Box (Type I) ................. 5 3.3 Flush Mounting (Type II) ......................
  • Page 11 DS-K1T690 Series Face Recognition Terminal User Manual 6.3 Set Administrator ......................... 41 Chapter 7 Basic Operation ......................45 7.1 Login ............................ 45 7.1.1 Login by Administrator ....................45 7.1.2 Login by Activation Password ..................48 7.2 Communication Settings ...................... 49 7.2.1 Set Wired Network Parameters ..................
  • Page 12 DS-K1T690 Series Face Recognition Terminal User Manual 7.7 Set Biometric Parameters ....................65 7.8 Temperature Measurement Settings ................... 67 7.9 Set Access Control Parameters .................... 69 7.10 Preference Settings ......................70 7.11 System Maintenance ......................72 7.12 Video Intercom ........................73 7.12.1 Call Client Software from Device ................
  • Page 13 DS-K1T690 Series Face Recognition Terminal User Manual 8.6.11 Online Users ......................86 8.6.12 View Device Arming/Disarming Information ............87 8.6.13 Network Settings ....................... 87 8.6.14 Set Video and Audio Parameters ................92 8.6.15 Customize Audio Content ..................94 8.6.16 Set Image Parameters ....................96 8.6.17 Set Supplement Light Brightness ................
  • Page 14 DS-K1T690 Series Face Recognition Terminal User Manual 9.4.2 Import and Export Person Identify Information ............131 9.4.3 Get Person Information from Access Control Device ..........134 9.4.4 Issue Cards to Persons in Batch ................. 134 9.4.5 Report Card Loss ....................... 135 9.4.6 Set Card Issuing Parameters ..................

  • Page 15: Chapter 1 Overview

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview Face recognition terminal is a kind of access control device for face recognition, which is mainly applied in security access control systems, such as logistic centers, airports, university campuses, alarm centrals, dwellings, etc.

  • Page 16: Chapter 2 Appearance

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal Name HDMI Interface Loudspeaker...
  • Page 17 DS-K1T690 Series Face Recognition Terminal User Manual Name Camera IR Light QR Code Scanner Card Presenting Area Temperature Measurement Module Fingerprint Recognition Area IR Light Tamper WiringTerminal SIM Slot Debugging Port USB Expended Interface Reserved Network Interface SD Card Slot...
  • Page 18 DS-K1T690 Series Face Recognition Terminal User Manual Note Interfaces of the device vary by model.The figures are for reference only. ● The soundbox interface does not support external headphones. ● Only devices that support the POE function have POE network ports.

  • Page 19: Chapter 3 Installation

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment Avoid backlight, direct sunlight, and indirect sunlight. ● For better recognition, there should be light source in or near the installation environment. ● The minimum bearing weight of the wall or other places should be 3 times heavier than the ●...
  • Page 20 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-1 Install Gang Box 2. After aligning the mounting plate screw holes with the gang box holes, secure the mounting plate on the wall with four supplied screws (SC-KA4×22).
  • Page 21 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-2 Install Mounting Plate 3. Route the cable through the cable hole, wire the cables and insert the cables in the gang box. Note Apply silicone sealant among the cable wiring area to keep the raindrop from entering.
  • Page 22 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-3 Apply Silicone Sealant 4. Align the device with the mounting plate, and secure the device on the mounting plate with 1 supplied screw (SC-M4×8-SUS-NL).

  • Page 23: Flush Mounting (Type Ii)

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-4 Secure Device 5. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.3 Flush Mounting (Type II) Steps 1.
  • Page 24 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-5 Install Gang Box 3. Install the mounting plate on the gang box with the four supplied screws (SC-K1M4×6).
  • Page 25 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-6 Install Mounting Plate 4. Route the cable through the cable hole, wire the cables and insert the cables in the gang box. Note Apply silicone sealant among the cable wiring area to keep the raindrop from entering.
  • Page 26 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-7 Apply Silicone Sealant 5. Align the device with the mounting plate, and secure the device on the mounting plate with 1 supplied screw (SC-M4×8-SUS-NL).

  • Page 27: Surface Mounting

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-8 Secure Device 6. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.4 Surface Mounting Steps Note The additional force shall be equal to three times the weight of the equipment. The equipment ad its associated mounting means shall remain secure during the installation.
  • Page 28 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-9 Mounting Template 2. Drill holes on the wall or other surface according to the Hole 1 on the mounting template. 3. Remove the cable hole on the mounting plate with tools.
  • Page 29 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-10 Install Mounting Plate 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding peripherals cables. Note If the device is installed outdoor, you should apply silicone sealant to the wiring exit to avoid...
  • Page 30 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-11 Apply Silicone Sealant 6. Align the device with the mounting plate and hang the device on the mounting plate.
  • Page 31 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-12 Hang Device 7. Use 1 supplied screw (SC-M4×8-SUS-NL) to secure the device and the mounting plate.

  • Page 32: Base Mounting

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-13 Secure Device 8. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen. 3.5 Base Mounting Steps Note You can refer to the following figure for base mounting bracket size.
  • Page 33 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-14 Base Mounting Bracket 1. Remove the back cover plate, route the cables through the cable hole, and connect them to the corresponding external devices' cables. 2. Install the back cover plate back, and install the device on the bracket with 4 supplied screws...

  • Page 34: Bracket Mounting

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-15 Remove Back Cover Plate Note The base mounting bracket is optional accessory. You should buy it for yourself. 3. Put the mounted device on the desk or other surface. 4. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.
  • Page 35 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-16 Install Mounting Template Note The bracket is optional accessory. You should buy it for yourself. 2. Remove the back cover plate, route the cables through the cable hole, and connect them to the corresponding external devices' cables.
  • Page 36 DS-K1T690 Series Face Recognition Terminal User Manual Figure 3-17 Install Device 4. After installation, for the proper use of the device (outdoor use), stick the protection film (parts of models supplied) on the screen.

  • Page 37: Chapter 4 Wiring

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 4 Wiring The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the descriptions below.
  • Page 38 DS-K1T690 Series Face Recognition Terminal User Manual Figure 4-1 Terminal Diagram The descriptions of the terminals are as follows:...

  • Page 39: Wire Normal Device

    DS-K1T690 Series Face Recognition Terminal User Manual Table 4-1 Terminal Descriptions Group Function Color Name Description Group A Power Input +12 V 12 VDC Power Supply Black Ground Group B Alarm Input Yellow/Blue Alarm Input 1 Black Ground Yellow/Orange IN2...

  • Page 40: Wire Secure Door Control Unit

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 4-2 Device Wiring Note You should set the face recognition terminal's Wiegand direction as Input to connect to a ● Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller.

  • Page 41: Wire Fire Module

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 4-3 Secure Door Control Unit Wiring Note The secure door control unit should connect to an external power supply separately. The suggested external power supply is 12V, 0.5A. 4.4 Wire Fire Module 4.4.1 Wiring Diagram of Door Open When Powering Off...
  • Page 42 DS-K1T690 Series Face Recognition Terminal User Manual Figure 4-4 Wire Device Figure 4-5 Wire Secure Door Control Unit Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal...

  • Page 43: Wiring Diagram Of Door Locked When Powering Off

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 4-6 Wiring Device Figure 4-7 Wiring Secure Door Control Unit 4.4.2 Wiring Diagram of Door Locked When Powering Off Lock Type: Cathode Lock, Electric Lock, and Electric Bolt (NC) Security Type: Door Locked When Powering Off...
  • Page 44 DS-K1T690 Series Face Recognition Terminal User Manual Scenario: Installed in Entrance/Exit with Fire Linkage Note The Uninterpretable Power Supply (UPS) is required. ● The fire system (NC and COM, normally closed when powering off) is connected with the lock ●...
  • Page 45 DS-K1T690 Series Face Recognition Terminal User Manual Figure 4-9 Wiring Diagram...

  • Page 46: Chapter 5 Activation

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.
  • Page 47 DS-K1T690 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least...

  • Page 48: Activate Via Web Browser

    Get the SADP software from the supplied disk or the official website http:// ● www.hikvision.com/en/ , and install the SADP according to the prompts. The device and the PC that runs the SADP tool should be within the same subnet.
  • Page 49 DS-K1T690 Series Face Recognition Terminal User Manual The following steps show how to activate a device and modify its IP address. For batch activation and IP addresses modification, refer to User Manual of SADP for details. Steps 1. Run the SADP software and search the online devices.

  • Page 50: Activate Device Via Ivms-4200 Client Software

    DS-K1T690 Series Face Recognition Terminal User Manual 5.4 Activate Device via iVMS-4200 Client Software For some devices, you are required to create the password to activate them before they can be added to the iVMS-4200 software and work properly. Steps Note This function should be supported by the device.

  • Page 51: Chapter 6 Quick Operation

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list.
  • Page 52 DS-K1T690 Series Face Recognition Terminal User Manual Figure 6-1 Welcome Page 2. Tap OK to save.

  • Page 53: Privacy Settings

    DS-K1T690 Series Face Recognition Terminal User Manual Note You can also change the settings in System Settings. ● If you install the device indoors near the window or the face recognition function is not ● working well, select Others. If you do not configure the application mode and tap Next, the system will select Indoor by ●...
  • Page 54 DS-K1T690 Series Face Recognition Terminal User Manual Figure 6-2 Privacy Upload Captured Pic. When Auth. (Upload Captured Picture When Authenticating) Upload the pictures captured when authenticating to the platform automatically. Save Captured Pic. When Auth. (Save Captured Picture When Authenticating)

  • Page 55: Set Administrator

    DS-K1T690 Series Face Recognition Terminal User Manual Save Registered Pic. (Save Registered Picture) The registered face picture will be saved to the system if you enable the function. Upload Pic. After Linked Capture (Upload Picture After Linked Capture) Upload the pictures captured by linked camera to the platform automatically.
  • Page 56 DS-K1T690 Series Face Recognition Terminal User Manual Figure 6-3 Add Administrator Page 3. Select a credential to add. Note Up to one credential should be added.
  • Page 57 DS-K1T690 Series Face Recognition Terminal User Manual : Face forward at the camera. Make sure the face is in the face recognition area. Click capture and click to confirm. : Press your finger according to the instructions on the device screen. Click to confirm.
  • Page 58 DS-K1T690 Series Face Recognition Terminal User Manual Note The device should be added to the center, or the calling operation will be failed. Enter password to authenticate.

  • Page 59: Chapter 7 Basic Operation

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.
  • Page 60 DS-K1T690 Series Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face, fingerprint or card to enter the home page.
  • Page 61 DS-K1T690 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed fingerprint or card attempts. 3. Optional: Tap and you can enter the device activation password for login.

  • Page 62: Login By Activation Password

    DS-K1T690 Series Face Recognition Terminal User Manual 7.1.2 Login by Activation Password You should login the system before other device operations. If you do not configure an administrator, you should follow the instructions below to login. Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page.

  • Page 63: Communication Settings

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 7-3 Home Page 7.2 Communication Settings You can set the wired network, the Wi-Fi parameter, the RS-485 parameters, the Wiegand parameters and access to Hik-Connect on the communication settings page.

  • Page 64: Set Wired Network Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page.
  • Page 65 DS-K1T690 Series Face Recognition Terminal User Manual Figure 7-5 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And...

  • Page 66: Set Rs-485 Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual Note Only digits, letters, and special characters are allowed in the password. 5. Set the Wi-Fi's parameters. - By default, DHCP is enable. The system will allocate the IP address, the subnet mask, and the gateway automatically.

  • Page 67: Set Wiegand Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.

  • Page 68: User Management

    DS-K1T690 Series Face Recognition Terminal User Manual 3. Enable Access to Hik-Connect 4. Enter Server IP. 5. Create the Verification Code, and you need to enter the verification code when you manage the devices via Hik-Connect. 7.3 User Management On the user management interface, you can add, edit, delete and search the user.

  • Page 69: Add Face Picture

    DS-K1T690 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. Up to 32 characters are allowed in the user name. ● 5. Optional: Add a face picture, fingerprints, cards, or Pin for the administrator.
  • Page 70 DS-K1T690 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Face Picture field to enter the face picture adding page.

  • Page 71: Add Fingerprint

    DS-K1T690 Series Face Recognition Terminal User Manual Note Make sure your face picture is in the face picture outline when adding the face picture. ● Make sure the captured face picture is in good quality and is accurate. ● For details about the instructions of adding face pictures, see Tips When Collecting/ ●...

  • Page 72: Add Card

    DS-K1T690 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the Fingerprint field to enter the Add Fingerprint page.

  • Page 73: View Pin Code

    DS-K1T690 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 6. Tap the Card field and tap +.

  • Page 74: Set Authentication Mode

    DS-K1T690 Series Face Recognition Terminal User Manual Note Numbers, upper case letters, lower case letters, and special characters are allowed in the user ● name. The suggested user name should be within 32 characters. ● 5. Tap the PIN code to view the PIN code.

  • Page 75: Delete User

    DS-K1T690 Series Face Recognition Terminal User Manual Search User On the User Management page, Tap the search area to enter the Search User page. Tap Card on the left of the page and select a search type from the drop-down list. Enter the employee ID, card No., or the user name for search.

  • Page 76: Delete Data

    DS-K1T690 Series Face Recognition Terminal User Manual 7.4.1 Delete Data Delete user data. On the Home page, tap Data → Delete Data → User Data . All user data added in the device will be deleted. 7.4.2 Import Data Steps 1.

  • Page 77: Identity Authentication

    DS-K1T690 Series Face Recognition Terminal User Manual Note The supported USB flash drive format is DB. ● The system supports the USB flash drive with the storage of 1G to 32G. Make sure the free ● space of the USB flash drive is more than 512M.

  • Page 78: Authenticate Via Multiple Credential

    DS-K1T690 Series Face Recognition Terminal User Manual 7.5.2 Authenticate via Multiple Credential Before You Start Set the user authentication type before authentication. For details, see Set Authentication Mode . Steps 1. If the authentication mode is Card and Face, Password and Face, Card and Password, Card and Face and Fingerprint, authenticate any credential according to the instructions on the live view page.

  • Page 79: Set Biometric Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual Sound Settings You can enable/disable the voice prompt function and adjust the voice volume. Note You can set the voice volume between 0 and 10. Time Settings Set the time zone, the device time and the DST.
  • Page 80 DS-K1T690 Series Face Recognition Terminal User Manual Parameter Description Note You can input the number from 1 to 10. Wide Dynamic It is suggested to enable the WDR function if installing the device outdoors. When there are both very bright and very dark areas simultaneously in the view, you can enable the WDR function to balance the brightness of the whole image and provide clear images with details.

  • Page 81: Temperature Measurement Settings

    DS-K1T690 Series Face Recognition Terminal User Manual Parameter Description If the person do not wear a face mask when authenticating, the device prompts a notification and the door will open. Must Wear If the person do not wear a face mask when authenticating, the device prompts a notification and the door keeps closed.
  • Page 82 DS-K1T690 Series Face Recognition Terminal User Manual Figure 7-11 Temperature Measurement Parameters The available parameters descriptions are as follows: Temp. Detection When enabling the function, the device will authenticate the permissions and at the same time take the temperature. When disabling the device, the device will authenticate the permissions only.

  • Page 83: Set Access Control Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual Measurement Area Configure the temperature measurement area. Unit Select a temperature unit according to your preference. 7.9 Set Access Control Parameters You can set the access control permissions, including the functions of terminal auth. mode, reader auth.

  • Page 84: Preference Settings

    DS-K1T690 Series Face Recognition Terminal User Manual Parameter Description Note Only the device with the fingerprint module supports the ● fingerprint related function. Biometric recognition products are not 100% applicable to ● anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
  • Page 85 DS-K1T690 Series Face Recognition Terminal User Manual Figure 7-13 Preference Settings Theme You can set the theme of the prompt window on the authentication page. You can select Theme as Iris Recognition Mode/Advertisement/Meeting/Simple. Advertisement After selecting this mode, the advertising area and identification authentication area of the device will be displayed on separate screens.

  • Page 86: System Maintenance

    DS-K1T690 Series Face Recognition Terminal User Manual You should set a room No. When you tap the call button on the authentication page, you can call the configured room directly without dialing. Call APP When you tap the call button on the authentication page, you will call the mobile client where the device is added.

  • Page 87: Video Intercom

    DS-K1T690 Series Face Recognition Terminal User Manual Note The page may vary according to different device models. Refers to the actual page for details. Capacity You can view the number of administrator, user, face picture, card, and event. Note Parts of the device models support displaying the fingerprint number. Refers to the actual ●...

  • Page 88: Call Center From Device

    DS-K1T690 Series Face Recognition Terminal User Manual 3. Click Device Management to enter the Device Management interface. 4. Add the device to the client software. Note For details about adding device, see Add Device. 5. Call the client software. 1) Tap on the device initial page.

  • Page 89: Call Device From Client Software

    DS-K1T690 Series Face Recognition Terminal User Manual 7.12.3 Call Device from Client Software Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up.

  • Page 90: Call Mobile Client From Device

    DS-K1T690 Series Face Recognition Terminal User Manual 7.12.5 Call Mobile Client from Device Steps 1. Get the mobile mobile client from the supplied disk or the official website, and install the software according to the prompts. 2. Run the mobile client and add the device to the mobile client.

  • Page 91: Chapter 8 Operation Via Web Browser

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 8 Operation via Web Browser 8.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation .

  • Page 92: Person Management

    DS-K1T690 Series Face Recognition Terminal User Manual Select the image size when starting live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view.

  • Page 93: Search Event

    DS-K1T690 Series Face Recognition Terminal User Manual Add Face Picture Click User → Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. Note The picture format should be JPG or JPEG or PNG, and the size should be less than 200 K.

  • Page 94: Configuration

    DS-K1T690 Series Face Recognition Terminal User Manual Steps 1. Click Device Management to enter the settings page. Figure 8-3 Device Management 2. Click Add to add the indoor station or sub door station. Enter the parameters and click OK to add.

  • Page 95: View Device Information

    DS-K1T690 Series Face Recognition Terminal User Manual You can also click Open to open the file folder to view details. Set Captured Pictures Saving Path Click Configuration → Local to enter the Local page. Select a saving path from your local computer and click Save.

  • Page 96: Set Dst

    DS-K1T690 Series Face Recognition Terminal User Manual You should set the NTP server's IP address, port No., and interval. Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time.
  • Page 97 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-6 Upgrade and Maintenance Page Click Reboot to start reboot the device. Or you can check Reboot Automatically to set desired reboot mode by selecting Reboot by Duration or Reboot by Time and set the corresponding parameters.

  • Page 98: Log Query

    DS-K1T690 Series Face Recognition Terminal User Manual Import Click and select the file to import. Click Import to start import configuration file. Upgrade Click Configuration → System → Maintenance → Upgrade & Maintenance . Select an upgrade type from the drop-down list. Click and select the upgrade file from your local PC.

  • Page 99: Certificate Management

    DS-K1T690 Series Face Recognition Terminal User Manual In order to increase the network security level when visiting websites, you can enable HTTP to acquire a more secure and encrypted network communication environment. The communication should authenticated by identity and encryption password after enabling HTTP, which is save.

  • Page 100: Change Administrator's Password

    DS-K1T690 Series Face Recognition Terminal User Manual Install CA Certificate Before You Start Prepare a CA certificate in advance. Steps 1. Go to Configuration → System → Security → Certificate Management . 2. Create an ID in the Inport CA Certificate area.

  • Page 101: View Device Arming/Disarming Information

    DS-K1T690 Series Face Recognition Terminal User Manual 8.6.12 View Device Arming/Disarming Information View device arming type and arming IP address. Go to Configuration → User Management → Arming/Disarming Information . You can view the device arming/disarming information. Click Refresh to refresh the page.
  • Page 102 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-7 TCP/IP Settings Page Set the parameters and click Save to save the settings. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, MTU, and the device port.
  • Page 103 DS-K1T690 Series Face Recognition Terminal User Manual DNS Server Set the preferred DNS server and the Alternate DNS server according to your actual need. Set Port Parameters Set the HTTP, RTSP and HTTPS port parmaeters. Click Configuration → Network → Basic Settings → Port .
  • Page 104 DS-K1T690 Series Face Recognition Terminal User Manual - Click Add, and enter the SSID, working mode, and encryption type. Click Connect. When the Wi-Fi is connected, click OK. 4. Optional: Set the WLAN parameters. 1) Click Network Settings. 2) Set the IP address, subnet mask, and default gateway. Or check Enable DHCP and the system will allocate the IP address, subnet mask, and default gateway automatically.
  • Page 105 DS-K1T690 Series Face Recognition Terminal User Manual Note Hik-Connect is an application for mobile devices. With the App, you can view live image of the device, receive alarm notification and so on. 3. Check the checkbox of Enable to enable the function.

  • Page 106: Set Video And Audio Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual Steps 1. Click Configuration → Network → Advanced → HTTP Listening . 2. Edit the destination IP or host name, URL and port. 3. Optional: Click Test to test whether the entered IP address or host name are valid.
  • Page 107 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-9 Video Settings Page Set the video channel, the stream type, the video type, resolution, the bitrate type, video quality, the frame rate, the Max. bitrate, the video encoding, and I frame interval.

  • Page 108: Customize Audio Content

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-10 Set Audio Parameters Drag the block to adjust the device input and output volume. Click Save to save the settings after the configuration. You can also enable Voice Prompt. Note The functions vary according to different models. Refers to the actual device for details.
  • Page 109 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-11 Customize Audio Content 2. Select Prompt as TTS(Text to Speech) to turn the text to audio content. 3. Select time schedule. 4. Enable the function. 5. Set the appellation. 6. Set the time period when authentication succeeded.

  • Page 110: Set Image Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual Note If authentication is failed in the configured time duration, the device will broadcast the configured content. 3) Enter the audio content. 4) Optional: Repeat substep 1 to 3. 5) Optional: Click to delete the configured time duration.

  • Page 111: Set Supplement Light Brightness

    DS-K1T690 Series Face Recognition Terminal User Manual 8.6.17 Set Supplement Light Brightness Set the device supplement light brightness. Steps 1. Click Configuration → Image → Supplement Light Parameters . Figure 8-12 Supplement Light Settings Page 2. Select a supplement light type and mode from the drop-down list. If you select the mode as ON, you should set the brightness.

  • Page 112: Time And Attendance Settings

    DS-K1T690 Series Face Recognition Terminal User Manual After selecting Automatic, the device will enter automatically enter the image fusion mode. You need to set set the Sensitivity. The larger the value, the higher the sensitivity, and the easier it is for the device to enter the image fusion mode.
  • Page 113 DS-K1T690 Series Face Recognition Terminal User Manual Set Manual Attendance via Web Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management.

  • Page 114: General Settings

    DS-K1T690 Series Face Recognition Terminal User Manual Set Manual and Auto Attendance via Web Set the attendance mode as Manual and Auto, and the system will automatically change the attendance status according to the configured schedule. At the same time you can manually change the attendance status after the authentication.
  • Page 115 DS-K1T690 Series Face Recognition Terminal User Manual Main Card Reader You can configure the device card reader's parameters. Sub Card Reader You can configure the connected peripheral card reader's parameters. If select Main Card Reader: Card Reader Type/Card Reader Description Get card reader type and description.
  • Page 116 DS-K1T690 Series Face Recognition Terminal User Manual Select an authentication mode according to your actual needs from the drop-down list. Multiple People Authentication Multiple people can be authenticated at the same time. Recognition Interval If the interval between card presenting of the same card is less than the configured value, the card presenting is invalid.
  • Page 117 DS-K1T690 Series Face Recognition Terminal User Manual Drag the block or enter number to set the period for event deleting. All events will be deleted according to the configured time duration. Delete Old Events by Specified Time Set a time and all events will be deleted on the configured time.
  • Page 118 DS-K1T690 Series Face Recognition Terminal User Manual Clear Registered Face Pictures All registered pictures in the device will be deleted. Clear Captured Pictures All captured pictures in the device will be deleted. Set Card Security Click Configuration → General → Card Security to enter the settings page.

  • Page 119: Video Intercom Settings

    DS-K1T690 Series Face Recognition Terminal User Manual Full Card No. All card No. will be read. Wiegand 26 (3 bytes) The device will read card via Wiegand 26 protocol (read 3 bytes). Wiegand 34 (4 bytes) The device will read card via Wiegand 34 protocol (read 4 bytes).
  • Page 120 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-13 Device No. Settings Device Type The device can be used as a door station or outer door station. Select a device type from the drop-down list. Note If you change the device type, you should reboot the device.
  • Page 121 DS-K1T690 Series Face Recognition Terminal User Manual Note If you change the No., you should reboot the device. ● The main door station No. is 0, and the sub door station No. ranges from 1 to 16. ● Phase No.
  • Page 122 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-14 Session Settings 2. Set registration password, main station IP, private server IP and enable Protocol 1.0. Registration Password Activation password of the main station. Main Station IP IP address of the main station.
  • Page 123 DS-K1T690 Series Face Recognition Terminal User Manual Number Settings Link the room No. and SIP numbers. Click Configuration → Intercom → Device No. to enter the page. Figure 8-15 Number Settings 1. Set the Device Type. 2. Set the Floor No..

  • Page 124: Access Control Settings

    DS-K1T690 Series Face Recognition Terminal User Manual 8.6.23 Access Control Settings Set Door Parameters Click Configuration → Access Control → Door Parameters . Figure 8-16 Door Parameters Settings Page Click Save to save the settings after the configuration. Door No.
  • Page 125 DS-K1T690 Series Face Recognition Terminal User Manual You can set the door contact as Remain Open or Remain Closed according to your actual needs. By default, it is Remain Closed. Exit Button Type You can set the exit button as Remain Open or Remain Closed according to your actual needs.
  • Page 126 DS-K1T690 Series Face Recognition Terminal User Manual RS-485 Address Set the RS-485 Address according to your actual needs. Note If you select Access Controller: If connect the device to a terminal via the RS-485 interface, set the RS-485 address as 2. If you connect the device to a controller, set the RS-485 address according to the door No.
  • Page 127 DS-K1T690 Series Face Recognition Terminal User Manual Input The device can connect a Wiegand card reader. Output The can connect an external access controller. And the two devices will transmit the card No. via Wiegand 26 or 34. 4. Drag the block to set the time interval and pulse width.
  • Page 128 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-18 Access Control and Elevator Control 2. Check Enable Elevator Control. 3. Set the elevator parameters. Elevator No. Select an elevator No. for configuration from the drop-down list. Elevator Controller Type Select an elevator controller from the drop-down list.

  • Page 129: Temperature Measurement Settings

    DS-K1T690 Series Face Recognition Terminal User Manual Note Up to 4 elevator controllers can be connected to 1 device. ● Up to 10 negative floors can be added. ● Make sure the interface types of elevator controllers, which are connected to the same ●...
  • Page 130 DS-K1T690 Series Face Recognition Terminal User Manual Enable Temperature Detection When enabling the function, the device will authenticate the permissions and at the same time take the temperature. When disabling the device, the device will authenticate the permissions only. Over-Temperature Alarm Threshold (Max./Min.) Edit the threshold according to actual situation.

  • Page 131: Set Biometric Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-20 Black Body Settings 2. Enable black body correction function. 3. Put a black body in front of the camera. Make sure there are no other objects between the camera and the black body.
  • Page 132 DS-K1T690 Series Face Recognition Terminal User Manual Set Basic Parameters Click Configuration → Smart → Smart . Note The functions vary according to different models. Refers to the actual device for details. Figure 8-21 Smart Settings Page Click Save to save the settings after the configuration.
  • Page 133 DS-K1T690 Series Face Recognition Terminal User Manual Note Biometric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes. Live Face Detection Security Level After enabling the face anti-spoofing function, you can set the matching security level when performing live face authentication.
  • Page 134 DS-K1T690 Series Face Recognition Terminal User Manual Face Recognition Timeout Value Set the timeout value when face recognizing. If the face recognition time is longer than the configured value, the system will pop up a prompt. ECO Mode After enabling the ECO mode, the device will use the IR camera to authenticate faces in the low light or dark environment.

  • Page 135: Set Meeting Plans

    DS-K1T690 Series Face Recognition Terminal User Manual Set the matching threshold when authenticating with face mask via ECO mode 1:N matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate. Set Recognition Area Click Configuration →...
  • Page 136 DS-K1T690 Series Face Recognition Terminal User Manual Figure 8-22 Meeting Plans 2. Set Meeting Room Name, Meeting Theme, and Host. 3. Set Start Time and End Time of the meeting. 4. Add Participants. Note You can add by entering names or work numbers to inquire device workers.

  • Page 137: Set Notice Publication

    DS-K1T690 Series Face Recognition Terminal User Manual Single Participant Only one of the participant attending the meeting checks in. All Participants All of the participant attending the meeting check in. Disable You can diable this function and participants attending the meeting don't have to check in.
  • Page 138 DS-K1T690 Series Face Recognition Terminal User Manual Simple After selecting this mode, the live view of the authentication page will be disabled, and in the meanwhile, the person's name, employee ID, face pictures will all be hidden. Normal After selecting this mode, the device displays the video preview screen and performs authentication.

  • Page 139: Chapter 9 Client Software Configuration

    DS-K1T690 Series Face Recognition Terminal User Manual Chapter 9 Client Software Configuration 9.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 9-1 Flow Diagram of Configuration on Client Software 9.2 Device Management...

  • Page 140: Add Device

    DS-K1T690 Series Face Recognition Terminal User Manual Example You can control entrance & exit and manage attendance after adding access control devices to the client; you can perform video intercom with the indoor stations and door stations. 9.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol.
  • Page 141 DS-K1T690 Series Face Recognition Terminal User Manual you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product. Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.

  • Page 142: Reset Device Password

    DS-K1T690 Series Face Recognition Terminal User Manual Address Edit the address of the device. Port Enter the device port number. The default port number is 8000. User Name Enter the device user name. By default, the user name is admin.

  • Page 143: Manage Added Devices

    DS-K1T690 Series Face Recognition Terminal User Manual Note For the following operations for resetting the password, contact our technical support. Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 144: Group Management

    DS-K1T690 Series Face Recognition Terminal User Manual 9.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations. Example For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management.

  • Page 145: Person Management

    DS-K1T690 Series Face Recognition Terminal User Manual Note You can click to switch the resource display mode to thumbnail view or to list view. 6. Click Import to import the selected resources to the group. 9.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc.
  • Page 146 DS-K1T690 Series Face Recognition Terminal User Manual Import Person Information You can enter the information of multiple persons in a predefined template (CSV/Excel file) to import the information to the client in a batch. Steps 1. Enter the Person module.
  • Page 147 DS-K1T690 Series Face Recognition Terminal User Manual Note The (folder of) face pictures should be in ZIP format. ● Each picture file should be in JPG format and should be no larger than 200 KB. ● Each picture file should be named as "Person ID_Name". The Person ID should be the same ●...

  • Page 148: Get Person Information From Access Control Device

    DS-K1T690 Series Face Recognition Terminal User Manual Note The exported file is in ZIP format. ● The exported face picture is named as "Person ID_Name_0" ("0" is for a full-frontal face). ● 9.4.3 Get Person Information from Access Control Device...

  • Page 149: Report Card Loss

    DS-K1T690 Series Face Recognition Terminal User Manual 3. Optional: Enter key words (name or person ID) in the input box to filter the person(s) that need issuing cards. 4. Optional: Click Settings to set the card issuing parameters. For details, refer to Issue a Card by Local Mode.

  • Page 150: Configure Schedule And Template

    DS-K1T690 Series Face Recognition Terminal User Manual Local Mode: Issue Card by Card Enrollment Station Connect a card enrollment station to the PC running the client. You can place the card on the card enrollment station to get the card number.

  • Page 151: Add Holiday

    DS-K1T690 Series Face Recognition Terminal User Manual 9.5.1 Add Holiday You can create holidays and set the days in the holidays, including start date, end date, and holiday duration in one day. Steps Note You can add up to 64 holidays in the software system.
  • Page 152 DS-K1T690 Series Face Recognition Terminal User Manual Steps Note You can add up to 255 templates in the software system. 1. Click Access Control → Schedule → Template to enter the Template page. Note There are two default templates: All-Day Authorized and All-Day Denied, and they cannot be edited or deleted.

  • Page 153: Set Access Group To Assign Access Authorization To Persons

    DS-K1T690 Series Face Recognition Terminal User Manual 4) Optional: Select a selected holiday in the right list and click to remove the selected one, or click Clear to clear all the selected holiday(s) in the right list. 7. Click Save to save the settings and finish adding the template.
  • Page 154 DS-K1T690 Series Face Recognition Terminal User Manual Figure 9-2 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device.

  • Page 155: Configure Advanced Functions

    DS-K1T690 Series Face Recognition Terminal User Manual Note If you change the persons' access information or other related information, you will view the promptAccess Group to Be Applied on the right corner of the client. You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later.
  • Page 156 DS-K1T690 Series Face Recognition Terminal User Manual Configure Parameters for Access Control Device After adding the access control device, you can configure its parameters, including overlaying user information on picture, uploading pictures after capturing, saving captured pictures, etc. Before You Start Add access control device to the client.
  • Page 157 DS-K1T690 Series Face Recognition Terminal User Manual Press Key to Enter Card Number If you enable this function, you can input the card No. by pressing the key. Wi-Fi Probe If you enable this function, the device can probe the surrounding communication devices' MAC address and upload the MAC address to the system.
  • Page 158 DS-K1T690 Series Face Recognition Terminal User Manual You can set the exit button as remaining closed or remaining open. Usually, it is remaining open. Door Locked Time After swiping the normal card and relay action, the timer for locking the door starts working.
  • Page 159 DS-K1T690 Series Face Recognition Terminal User Manual Steps 1. Click Access Control → Advanced Function → Device Parameter . 2. In the device list on the left, click to expand the door, select a card reader and you can edit the card reader's parameters on the right.
  • Page 160 DS-K1T690 Series Face Recognition Terminal User Manual Select the fingerprint recognition level in the drop-down list. Default Card Reader Authentication Mode View the default card reader authentication mode. Fingerprint Capacity View the maximum number of available fingerprints. Existing Fingerprint Number View the number of existed fingerprints in the device.
  • Page 161 DS-K1T690 Series Face Recognition Terminal User Manual user cannot authenticate via the fake face within 5 minutes. Within the 5 minutes, the user can authenticate via the real face twice continuously to unlock. Application Mode You can select indoor or others application modes according to actual environment.

  • Page 162: Configure Device Parameters

    DS-K1T690 Series Face Recognition Terminal User Manual Passing Mode Select the controller which will control the barrier status of the device. If you select According to Lane Controller's DIP Settings, the device will follow the lane ● controller's DIP settings to control the barrier. The settings on the software will be invalid.
  • Page 163 DS-K1T690 Series Face Recognition Terminal User Manual 2. On the navigation bar on the left, enter Advanced Function → More Parameters . 3. Select an access control device in the device list and click Face Recognition Terminal. 4. Set the parameters.
  • Page 164 DS-K1T690 Series Face Recognition Terminal User Manual 5. Set the baud rate, data bit, the stop bit, parity type, communication mode, working mode, and connection mode in the drop-down list. Note When the connection mode is Connect Access Control Device, you can select Card No. or Person ID as the output type.

  • Page 165: Door/Elevator Control

    DS-K1T690 Series Face Recognition Terminal User Manual 1. Enter the Access Control module. 2. On the navigation bar on the left, enter Advanced Function → More Parameters . 3. Select an access control device in the device list and click M1 Card Encryption to enter the M1 Card Encryption page.

  • Page 166: Check Real-Time Access Records

    DS-K1T690 Series Face Recognition Terminal User Manual Note For Remain All Unlocked and Remain All Locked, ignore this step. 4. Click the following buttons to control the door. Unlock When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically.
  • Page 167 DS-K1T690 Series Face Recognition Terminal User Manual Before You Start You have added person(s) and access control device(s) to the client. For details, refer to Person Management and Add Device . Steps 1. Click Monitoring to enter monitoring module. Real-time access records are displayed on the bottom of the page. You can view record details, including card No., person name, event time, door location, temperature, authentication type...
  • Page 168 DS-K1T690 Series Face Recognition Terminal User Manual 7. Optional: Click to view details (including person's detailed information and the captured picture). Note In the pop-up window, you can click to view details in full screen.

  • Page 169: Appendix A. Tips For Scanning Fingerprint

    DS-K1T690 Series Face Recognition Terminal User Manual Appendix A. Tips for Scanning Fingerprint Recommended Finger Forefinger, middle finger or the third finger. Correct Scanning The figure displayed below is the correct way to scan your finger: You should press your finger on the scanner horizontally. The center of your scanned finger should align with the scanner center.
  • Page 170 DS-K1T690 Series Face Recognition Terminal User Manual Environment The scanner should avoid direct sun light, high temperature, humid conditions and rain. When it is dry, the scanner may not recognize your fingerprint successfully. You can blow your finger and scan again.

  • Page 171: Appendix B. Tips When Collecting/Comparing Face Picture

    DS-K1T690 Series Face Recognition Terminal User Manual Appendix B. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression Keep your expression naturally when collecting or comparing face pictures, just like the ●...
  • Page 172 DS-K1T690 Series Face Recognition Terminal User Manual Size Make sure your face is in the middle of the collecting window.

  • Page 173: Appendix C. Tips For Installation Environment

    DS-K1T690 Series Face Recognition Terminal User Manual Appendix C. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight...

  • Page 174: Appendix D. Dimension

    DS-K1T690 Series Face Recognition Terminal User Manual Appendix D. Dimension...

  • Page 175: Appendix E. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure E-2 Device Command...
  • Page 176 UD24752B...

This manual is also suitable for:

Ds-k1t690mfDs-k1t690mf-xDs-k1t690m-tDs-k1t690m-e1Ds-k1t690mw

Table of Contents