Figure 12. Remove the Wi-Fi card
Screw specifications
M2.0 x L3.5
Go to
https://support.lenovo.com/partslookup
part:
Wi-Fi card
Remove the DC-in bracket
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 29
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove one screw and then remove the DC-in bracket.
Figure 13. Remove the DC-in bracket.
Screw specifications
M2.0 x L3.5
Number of screws
1
to look up the Lenovo part number of the following replacement
Number of screws
1
.
Chapter 4
Removing a FRU or CRU
33