Table of Contents
Advertisement
Figure 28. Disconnect the fingerprint board cable and remove the fingerprint board with cable
Screw specifications
M1.2 x L2.0
Step 3.
Separate the fingerprint board cable from the fingerprint board
Figure 29. Separate the fingerprint board cable from the fingerprint board
Go to
https://support.lenovo.com/partslookup
replacement parts:
Fingerprint board
Fingerprint board cable
Remove the hall sensor board module
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 29
"Remove the battery pack" on page 32
Step 1.
Disconnect the hall sensor board cable from the system board and then remove the hall sensor
board with cable.
44
Hardware Maintenance Manual
Number of screws
2
to look up the Lenovo part numbers of the following
Advertisement
Table of Contents
