Remove The Lcd Module - Lenovo CAMPUS THINKBOOK 16P G2 Hardware Maintenance Manual

Figure 38. Remove the strip cover
Screw specifications
M1.6 x L1.5
Go to
https://support.lenovo.com/partslookup
part:
Strip cover

Remove the LCD module

Make sure the following FRUs (CRUs) have been removed.
"Remove the lower case" on page 29
"Remove the solid-state drive (SSD) module" on page 30
"Remove the battery pack" on page 32
"Remove the Wi-Fi card" on page 32
"Remove the DC-in bracket" on page 33
"Remove the memory module mylar" on page 34
"Remove the memory module" on page 34
"Remove the heat sink" on page 35
"Remove the fans" on page 36
"Remove the solid-state drive (SSD) bracket" on page 37
"Remove the USB board module" on page 37
"Remove the system board" on page 41
"Remove the strip cover" on page 47
Step 1. Remove six screws.
Number of screws
4
to look up the Lenovo part number of the following replacement
.
Chapter 4 Removing a FRU or CRU
49