Screw specifications
M2.0 × L8.0
Figure 4. Remove the lower case (for thin models)
Screw specifications
M2.0 × L8.0
M2.0 × L5.0
Go to
https://support.lenovo.com/partslookup
replacement part:
Lower case
Remove the DC-in bracket
Make sure the following FRUs (or CRUs) have been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board. Remove one screw and then remove the
DC-in bracket.
Attention: Use your fingernail to pull the connector to unplug it. Do not pull the cable.
Number of screws
10
Number of screws
4
6
to look up the Lenovo part numbers of the following
.
Chapter 4
Removing a FRU or CRU
29