Remove The Solid-State Drive (Ssd) Module - Lenovo CAMPUS THINKBOOK 16P G2 Hardware Maintenance Manual

Go to
https://support.lenovo.com/partslookup
part:
Lower case

Remove the solid-state drive (SSD) module

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 29
Step 1. Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Figure 5. Disconnect the battery pack cable.
Step 2. Remove the SSD Thermalpad.
Note: The SSD Thermalpads is not reusable. Replace it when replacing related FRUs.
Figure 6. Remove the SSD Thermalpad
Step 3. Remove two screws.
30
Hardware Maintenance Manual
to look up the Lenovo part number of the following replacement