Table of Contents
Advertisement
4.
After login, the Set Remote ID window displays. Enter the new channel number into the text
box next to the Channel No. . Then click the Send button
5.
Click the Close button
Note: The valid channel number is from 0 to 39.
Channel No.: The channel number has been preset by the factory. Only under very rare
circumstance it is needed to change the channel to avoid the interference with other nearby host.
Once the channel number has been changed, the instructor‟s remote and all the student remote
keypads channel need to be reset in order to make sure the system will work properly.
2.4.3 Hardware Test:
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
to close the setting.
www.qomo.com
.
106
Advertisement
Table of Contents
