Table of Contents
Advertisement
3.2.2.4.3 Connecting the instructor's keypad to the host receiver:
To connect the instructor keypad to the host receiver, follow these steps:
(1)
Login to a
class:
To login to a class, follow these steps:
Under the NoHost screen, select "Login" Right Soft Key
OR
1.
Under the NoHost screen, press the "Menu/OK" Key
2.
Select item "Login" to login into your class.
(2) Set Channel:
If the clicker does not automatically detect the right class you would like to attend, you may manually
set your clicker communication channel to the channel number that the class use. The class channel
number is the main receiver channel number set.
Note: The main receiver channel can be set in the software. Refer to the software channel session.
To set the instructor clicker channel, follow these steps:
1.
Under the NoHost screen, press the Menu/OK Key
2.
Select "1.SetChannel" submenu.
Under the "SetChannel" screen, enter a valid channel number.
(3) Login to the last same channel class:
To login to the last same channel class, follow these steps:
Under the NoHost screen, press the Start Key
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
to login to your nearby class.
or Right Key
www.qomo.com
to enter the main menu.
to enter into the main menu.
to directly log into the class
120
Advertisement
Table of Contents
