Instructor Keypad; Specifications - Qomo HiteVision QRF 500 User Manual

The following information is displayed on the screen:

RF Signal strength is displayed in the upper left corner

The battery indicator is displayed in the upper right corner

Device ID is displayed in the upper middle

Mode Shift is displayed on the right
3.1.2.2.2 Receive Question Screen
The following information is displayed on the screen:
Question NO.: When turning to the new question, the host sends the Question NO. to the student
keypad.

3.2 Instructor Keypad

3.2.1 Specifications

Dimension (L × W × H): 5 "x 2 " x 1 "
Keys: 21
Power required: 2 AA Batteries
RF transmission distance: ~200 feet
Battery life: 6 months to 1 year depending on use
(Not including laser pointer use and Offsite mode use)
Function: Instructor/Presenter
Note:
Each of the clickers is battery operational. Insert two "AA" batteries into the port on the back of the
clicker as indicated on the hardware. Slide the back plate into place. For a more secure closure, use
the screwdriver to insert the screw. The Screws and screwdriver are provided for your convenience.
Do not over tighten in order to avoid stripping the screw. When the batteries have expired, remove
the screw and back plate and replace the batteries with fresh ones. Re-secure the back plate and
screw, as necessary.
Enclosed in this package are the following items
Screwdriver
Screws
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
www.qomo.com 114