Part 3. Hardware & System Installation Illustration; Student Keypad; Specifications; Illustration - Qomo HiteVision QRF 500 User Manual

Part 3. Hardware & System Installation

3.1 Student Keypad

3.1.1 Specifications

Dimensions (L× W× H): 4.5‟‟ x 1.8‟‟x0.71
Keys: 21
Power required: 2 AAA Batteries
RF transmission distance: ~200 feet
Battery life: Depends upon use or up to 6 months
Function: Transmit response signals
Note:
Each of the clickers is battery operational. Insert two "AAA" batteries into the port on the back of the
clicker as indicated on the hardware. Slide the back plate into place. For a more secure closure, use
the screwdriver to insert the screw. The Screws and screwdriver are provided for your convenience.
Do not over tighten in order to avoid stripping the screw. When the batteries have expired, remove
the screw and back plate and replace the batteries with fresh ones. Re-secure the back plate and
screw, as necessary.
Enclosed in this package are the following items
Screwdriver
Screws

3.1.2 Illustration

3.1.2.1 Student Keypad Layout

1. Power: Turns unit on and off
2. Screen Display
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
Illustration
‟‟
www.qomo.com 112