Table of Contents
Advertisement
You can click the Hardware under Settings window to test the student remote keypad stroke.
To use the hardware test tool, follow these steps:
1.
Click the Hardware button to display the Hardware test window.
2.
When the main receiver is plugged into a USB port, the channel number of the receiver will be
displayed on the Hardware Channel text box.
3.
Press a key on the student keypad; the key result will display on the corresponding ID row.
(This test can only test one student keypad for a time.)
4.
Using the instructor remote control, select the hardware test menu. Refer to the instructor a
hardware manual for details regarding how to enter the hardware test menu. Then select the
same channel number as the one displayed on the Hardware Channel text box.
5.
Click the OK button to close the hardware testing.
Copyright © 2007 -2011 All Rights Reserved by QOMO HiteVision.
www.qomo.com
107
Advertisement
Table of Contents
