Align Center Spacer (26) and Swivel Clevis (6) with Axle (4). Push Axle (4) through
4
Swivel Clevis (6) and Spacer (26) and then through rest of Undercarriage (2).
Depress Foot Pedal (12) and insert Drawbar assembly into Front Support (3) .
5
Tighten Bolts
on Front Support
after Latching
into Drawbar
6
Slide Washers (24) and Wheels (20) onto Axle (4) and secure with Hairpins (25)
as shown.
Assembly Instructions
12
6
26
3
4
24
5
4
2
MAKE SURE
VALVE STEM
IS FACING OUT
25
24
20