Advertisement
Available languages
Available languages
18
www.raider.bg
1. General guidelines for safe operation.
Read all instructions carefully. Failure of the nature following instructions can cause electric shock, fire and / or severe
injuries. Keep these instructions in a safe place.
1.1. Safe operation of electric chain saws.
Warning! Persons unfamiliar with instruction manual are not allowed to use chain saw.
Use the chain saw for cutting wood only.
Other use of the chain saw is the sole responsibility of the user who should bear in mind that it may be dangerous.
The manufacturer is not responsible for losses and damages resulting from unintended use of the chain saw.
1.2. Workplace. Work area safety.
Keep your workplace tidy and ensure it is well lit.
Untidiness and insufficient illumination contribute to accidents especially when chain saws are in use.
Keep children and bystanders away from the workplace.
Distraction may cause loss of control over the tool.
1.3. Safety when working with electricity.
Keep chain saw from rain and moisture.
Infiltration of water into the chain saw increases the risk of electric shock.
1.4. Personal safety.
Use safety equipment, such as work suit, protective glasses, protective shoes, protective helmet, earmuffs, protection
and leather gloves. Using safety equipment in appropriate conditions reduces risk of body injury.
Do not overestimate your abilities. Stand firmly and keep your balance at all times.
It enables better control over the chain saw in unpredicted situations.
Do not wear loose clothing or jewellery. Keep your hair, clothes and gloves away from moving parts.
Loose clothing, jewellery or long hair may be caught by moving parts.
1.5. Transportation and storage.
When carrying the chain saw put on the chain cover and switch on the chain brake. Carrying unsecured and operating
chain saw may cause body injury.
Carrying the chain saw is possible only when holding its front handle.
Other parts may not ensure appropriate grip and even cause injury.
Inspect your chain saw. Check alignment and fixing of moving parts, check against part cracks and all other factors
that may affect operation of the chain saw. Repair the chain saw before use if it is found damaged. Many accidents are
caused by improper maintenance of machine.
Saw chain should be clean and sharp. Proper maintenance of sharp cutting edges of saw chain reduces the risk of
jamming and makes operation easier.
1.6. Power tool use and care.
Check proper operation of the saw brake regularly. In emergency situation, non-operational brake may make saw
chain disengagement impossible.
1.7. Safety operation.
1.7.1. Be concentrated, watch their actions carefully and act cautiously and prudently. Do not use the chain saw
when you are tired or under the influence of drugs, alcohol or narcotic drugs.
A moment of distraction at work with chain saw may have the effect of extremely serious injuries.
1.7.2. Avoid the danger of incorporating the chain saw inadvertently.
If you carry a chain saw, keep your finger on the trigger switch, there is the risk of accident.
1.7.3. Before you switch on the chain saw, that you are sure to remove all utilities and wrenches.
Utilities, forgotten on rotating unit can cause injuries.
1.7.4. Avoid unnatural positions of the body. Work in a stable position of the body at any time and keep the balance.
So you can control the chain saw better and safer if unexpected situations arise.
1.7.5. Keep a chain saw in places where they can not be reached by children. Do not allow them to be used by
persons who are not familiar with how to work with them and have not read those instructions. When you are in the hands
of inexperienced users, chain saw can be extremely dangerous.
1.7.6. Keep your chain saw with care. Check whether the mobile units operate impeccable, whether it spells, if there
is a broken or damaged item which distort or alter the functions of the chain saw. Before using the chain saw, make sure
that the damaged parts to be repaired. Many accidents are caused by poorly maintained power tools and appliances.
1.7.7. Never leave chain saw before working tool to completely stop its rotation. Rotary tool can touch the object,
resulting in losing control of the chain saw.
Advertisement
