Pendant Type Installation
✽ To attach or detach the camera, refer to the picture.
* Attaching the camera: Hold up the camera and push it to the mount as shown in the
picture. Push the camera until you hear a "click".
* Detaching the camera: To detach the camera, pull the camera downward while pushing
the unlock buttons on the camera upward.
Unlock Button
To attach the
To detach the
camera
camera
10. Assembling Dome Cover
Once the camera is successfully attached, secure
the mount with the transparent dome cover. Next,
turn on the power.
11. Dome Cover Setting
Once the installation is complete, please optimize
the camera focus settings. On the camera's OSD
Menu, set the Dome Cover setting to Outdoor.
(Directory: Main Menu/Camera Setting/Others)
Others
Sync
INTERNAL
Stabilizer
OFF
③ Image Adj
Freeze
OFF
Dome Cover
Outer
14
SPEED DOME CAMERA ACCESSORIES
UNLOCK
Pendant Type Installation
■ 3.2 Ceiling Mount Type Installation
This guideline is based on the installation of the ceiling flange STB-30PF.
STH-380NPO
STH-370NPO
STH-360NPO
STH-370NPI
STB-496PPV
STB-30PF
15
SPEED DOME CAMERA ACCESSORIES