Pendant Type Installation; Wall Mount Type Installation - Samsung SNP-3750 Installation Manual

Pendant Type Installation

■ 3. Pendant Type Installation
■ 3.1 Wall Mount Type Installation
8
SPEED DOME CAMERA ACCESSORIES
STH-380NPO
STH-370NPO
STH-360NPO
STH-370NPI
STB-270PWV
Pendant Type Installation
1. Securing Wall Bracket and Wiring
As shown in the picture, secure the wall bracket to the wall, and then pull the wires out
of the bracket. Please note that the STH-380NPO housing requires an additional
installation of the fan heater adapter enclosed with the product.
✽ To store the adaptor, the STB-270B Setup Box (Page 31) can be used.
Notes
 •   D onotconnectthecameratoapoweroutletuntiltheinstallationiscomplete.Supplying
power in the middle of the installation may cause fire or damage the product.
 •  S TH-380NPOrequiresanadditionalinstallationofthefanheateradapterenclosedwiththe
product. Connecting the fan heater to a power outlet used for the camera can cause fire or
accidents.
2. Preparing Housing
Open the hinged door at the bottom of the housing.
Hold the knob on the hinged door to open.
3. Connecting Housing and Bracket
To prevent the housing from falling down during the installation process, hook the safety
cable on the bracket loop as shown in the picture.
Fan Heater Adaptor
(STH-380NPO Only)
Camera Adaptor
Knob
9
SPEED DOME CAMERA ACCESSORIES