Advertisement
InSTallaTIOn InSTruCTIOnS
Select an installation position or place that can endure more than 4 times of the total weight
1.
of the installation structure.
At least 250mm or more of spare height is required above the CEILING BOARD.
.
CEILING BOARD's thickness should be less than 40mm.
3.
Be sure to secure the SAFETY WIRE to avoid a product fall.
.
If you want to attach the camera to the ADAPTOR, use the only provided SCREWS.
.
InSTallaTIOn (indoor type)
Place the TEMPLATE on the CEILING BOARD and drill a guided hole.
1.
Remove the round filling ("C") from the TEMPLATE.
❶
Place TeMPlaTe A onto the CeIlInG bOard to which you will attach the ceiling
2
mount ADAPTOR and drill a hole of Ø198mm in diameter.
See the figure below for the hole shape.
Ø198mm
형판
TEMPLATE
_ SHD-3000F1
More than 250mm
250mm 이상일 것
천장보드
CEILING BOARD
40mm 이하일 것
Less than 40mm
Ø198mm
천장 보드
CEILING BOARD
Advertisement
