Table of Contents
Advertisement
Pendant Type Installation
6. Attaching Camera
Carefully attach the camera to the mount following the alignment guide marks as shown in
the picture. First hook the camera's safety cable on the mount, and then attach the camera.
The safety cable is coiled inside the install base. As shown in the leftward picture, pull out
the safety cable from the install base and then hook it to the mount.
Safety
Cable
✽ To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
Notes
• M akesuretofirsthookthecamera'ssafetycabletothemountbeforeproceeding.Otherwise
youmaybeexposedtoseriousinjurycausedbyafallencamera.
✽ To attach or detach the camera, refer to the picture.
* Attaching the camera: Hold up the camera and push it to the mount as shown in the
picture. Push the camera until you hear a "click".
* Detaching the camera: To detach the camera, pull the camera downward while pushing
the unlock buttons on the camera upward.
Unlock Button
To attach the camera
To detach the camera
20
SPEED DOME CAMERA ACCESSORIES
Alignment
Direction
Guides
Alignment
Direction
Guides
Alignment
Directions
UNLOCK
On-Ceiling Mount Type Installation
■ 4. On-Ceiling Mount Type Installation
This guideline is based on the installation of the indoor flange STB-370PC.
STB-370NPC
21
SPEED DOME CAMERA ACCESSORIES
Advertisement
Table of Contents
