Installation Guide ................8 Component Name .................18 Thank you for purchasing our products. This product is to be used for the installation of the Samsung 30x optical zoom External Dimensions ..............20 Speed Dome Camera series and the 23x optical zoom Speed Dome camera.
STH-330POV/320PO STH-270PWV : “Outdoor Housing” for the Samsung Speed Dome Camera. : This “Wall Type Mount” is used for the installation of indoor or outdoor housing (STH-330POV / STH-330PIV / STH-320PO) of Samsung Speed Dome Camera. - STH-330POV: STH-320PIV+Cooling Fan/Heater...
: It is the “Ceiling Flange” for Samsung Speed Dome cameras. : It is the “Coner mount” for Samsung Speed Dome cameras. STB-350PPM : It is the “Parapet mount” used to install the indoor/outdoor housing for Samsung Speed Dome cameras. SPEED DOME CAMERA ACCESSORIES...
6. Adjust the direction of the camera by aligning the two arrows at the bottom of the camera body, and then Arrows The STH-330POV is an STH-330PIV (Indoor housing) with a cooling fan and heater added. The STH- mount the camera body on the housing marke 320PO (Outdoor housing) is a lightweight model.
1. Attach the enclosed template to the desired location on the ceiling where you want to install the Samsung 30x optical zoom Speed Dome Camera. Make an 88mm hole following the circular line on the template, to allow space for the external cabling to be drawn through.
STB-330PC. 5. Insert the camera into the mount by matching the fastening screw parts at the bottom of Samsung Speed Dome Camera to the arrow of the camera holder and assemble by turning clockwise .Attach the fastening screws to prevent the camera from dropping.
Installation Guide 4. Install Eyebolts to the embedded indoor housing and attach the the anti-drop cable to within the STH-330PEV(Embedded indoor Housing) ceiling structure. Then use the three included screws to secure the embedded indoor housing to the 1 .Attach the enclosed template to the desired installation location on the ceiling. Make 3 small holes ceiling.
Installation Guide STB-330PPM (Paul Mount) STB-350PPM (Parapet Mount) 1. Drill 8 holes in the wall to insert anchor bolts with spaces 1. Fix the paul mount by using wires. between the holes in the wall matching those in the parapet 2.
Specification Model Model STB-496PPV STH-330POV STB-330PC STB-20PF STH-330PIV STH-330PEV STH-320PO STB-270PWV Item Item Operating Temperature Operating Temperature -20˚C~50˚C -10˚C~50˚C -10 ~50 -20˚C~50˚C -20˚C~50˚C -10˚C~50˚C -10˚C~50˚C -20˚C~50˚C Range Range 0 to 90%RH 1 to 90%RH 1 to 90%RH 1 to 90%RH...
Specification Model STB-30PF STB-340PCM STB-330PPM STB-350PPM Item Operating Temperature -20˚C~50˚C -20˚C~50˚C -10 ~50 -20 ~50 Range 1 to 90%RH 1 to 90%RH 1 to 90%RH 1 to 90%RH Humidity (non-condensing) (non-condensing) (non-condensing) (non-condensing) Cei l i n g Fl a nge ALDC 12 PF 1 1/4 Coner Bracket...