Chapter7 Common Commands; Cls; Ese - ITech IT8600 Series Programming Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование

*CLS

Command syntax
Parameter

*ESE

Command syntax
Parameter
Power-On Value
Example
Query Syntax
Returned value
Relevant Command

Chapter7 Common Commands

This command is used to clear following registers:

Standard Event Register

Questionable Event Register

Status Byte Register
*CLS
None
This command is used to edit the value of standard event enable register. It
defines the specified bits from standard event register that will cause the value
of ESB bit in status byte register to be 1.
*ESE <NR1>
0～255
Refer to *PSC command
*ESE 128
*ESE?
<NR1>
*ESR? *PSC *STB?
Copyright © Itech Electronic Co., Ltd.
www.tehencom.com
Common Commands
59