[Source:]Protection:clear; Protection:auto:clear; Current - ITech IT8600 Series Programming Manual

ООО "Техэнком" Контрольно-измерительные приборы и оборудование
Returned value:

[SOURce:]PROTection:CLEar

Command syntax:
Parameter:

PROTection:AUTO:CLEar

Command syntax:
Parameter:
Reset value:
Query Syntax:
Returned value:

CURRent

Command syntax:
0|1
This command is used to read the protection state when electronic load is
reset.
[SOURce:]PROTection:CLEar
None
This command is used to set the state when electronic load clear the protection
automatically.
[SOURce:]PROTection:AUTO:CLEar[:STATe] <bool>
<0|1|OFF|ON>
0
[SOURce:]PROTection:AUTO:CLEar[:STATe]?
0|1
This command is used to set the current value of electronic load.
[SOURce:]CURRent[:LEVel][:IMMediate][:AMPLitude] <NRf+>
Copyright © Itech Electronic Co., Ltd.
www.tehencom.com
Load Commands
22