Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 94

3
Table 3-2 9931-EMDE Function Menu List — continued
Note:
Default factory preset routing routes bus channels Bus Ch 1 thru Bus Ch 16 to embedded outputs Emb Ch 1 thru
Emb Ch 16.
• Embedded Output Channel Source Select
• Bus Ch 1 thru Ch 16 as Source for
Embedded Channel Output
• Upmixer Channels as Source for
Embedded Channel Output
• Loudness-Processed Channels as
Source for Embedded Channel Output
• Tone as Source for Embedded
Channel Output
3-42
• •
•
•
•
•
• •
•
•
•
•
9931-EMDE PRODUCT MANUAL
9931-EMDE Function Menu List and Descriptions
(continued)
With the Emb Audio Out sub-tab selected, using the Source drop-down
list selects the card audio source to be directed to the corresponding
embedded output channel from the choices described below.
Bus Ch 1 thru Bus Ch 16 range in Source drop-down list routes a card
internal bus channel (Bus Ch 1 thru Bus Ch 16) to be the source for the
selected embedded output channel.
(In this example, Bus Ch 1 is the source for destination Embedded output
Ch 1)
Upmix L thru Upmix Rs range in Source drop-down list routes an
upmixed channel to be the source for the selected embedded output
channel.
(In this example, Upmix L is the source for destination Embedded output
Ch 1)
LP51 L thru LP51 Rs (5.1-channel loudness processor processed
channels L thru Rs) range in Source drop-down list routes a
loudness-processed channel to be the source for the selected embedded
output channel.
(In this example, loudness-processed channel LP51 L is the source for
destination Embedded output Ch 1)
Note: Where stereo loudness processor is available, drop-down
selections for these channels are LP2 L and LP2 R.
Tone 50 Hz thru Tone 16 kHz range in Source drop-down list routes one
of eight tone frequencies to be the source for the selected embedded
output channel.
(In this example, 50 Hz tone is the source for destination Embedded
output Ch 1)
9931-EMDE-OM (V1.17)