Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 93

Operating Instructions
Table 3-2 9931-EMDE Function Menu List — continued
Output Audio Routing/Controls
Card 16-Ch Internal Bus
Audio
DSP
Dolby
AC-3
Encode
9931-EMDE-OM (V1.17)
Output Audio
Crosspoint
Bus Ch 1, 2
Upmix L thru Rs
Dolby ENC
®
9931-EMDE PRODUCT MANUAL
9931-EMDE Function Menu List and Descriptions
Provides controls to route card audio from card
processing paths to outgoing embedded and AES audio
destinations. Use the corresponding sub-tab to access
embedded or AES output routing.
The card internal bus, Audio DSP outputs, and
the Dolby encoder output pair are available as
sources for the card embedded audio and AES
audio outputs.
Embed Out The example here shows various Source
Ch 7, Ch 8
routing selections (using the Emb Audio Out
and AES Audio Out sub-tabs) that direct upmix
Embed Out
outputs L thru Rs to Embedded outputs Ch 1
Ch 1 - Ch 6
thru Ch 6, the pre-upmix Bus Ch1 and Ch 2
sources to Embedded outputs Ch 7 and Ch 8,
AES Out
and a Dolby encoded pair to AES outputs Ch 1
Ch 1, Ch 2
and Ch 2 (unused embedded and AES
channels can be set to Silence or Mute).
Each bus channel provides Gain, Mute, and a
peak level display.
The source-to-destination correlation shown
here is only an example; any of the digital audio
output destinations described on the following
pages can receive inputs from any of the
internal bus, DSP, or Dolby encoder sources.
3-41