Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 47

Installation and Setup
Table 2-1 9931-EMDE Rear Modules — continued
9931-EMDE Rear Module
Note: When using Y/C ("S-video") analog input or output, connections are as shown below and not as shown on label
(which correspond to YPbPr and composite mode connections).
Label Y/C Input Mode
Pr C
Pb/C Y
Y/Cmpst NC
RM20-9931-XC Expansion Rear Module
RM20-9931-XD Expansion Rear Module
9931-EMDE-OM (V1.17)
Y/C Output Mode
C
Y
Composite
9931-EMDE PRODUCT MANUAL
Description
Used in conjunction with a base Rear Module to
provide the following additional connections:
• Eight analog balanced audio I/O (
thru ; I/O function of each connection
AN-AUD I/O 8
is switch-configurable)
• Two fiber I/O (GUI configurable as I/O)
Used in conjunction with a base Rear Module to
provide the following additional connections:
• Six analog balanced audio I/O (
; I/O function of each connection is
AN-AUD I/O 8
switch-configurable)
• Analog Y/composite, Pr/C, and Pb coaxial inputs
(Y IN, Pr IN, and Pb/C IN, respectively)
• Analog composite output (Cmpst OUT)
Installing a Rear Module
C
Y
See table
AN-AUD I/O 1
thru
AN-AUD I/O 1
2-11