Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 31

Introduction
Table 1-4 Technical Specifications
Item
Part number, nomenclature
Installation/usage environment
Power consumption
Environmental:
Operating temperature:
Relative humidity (operating or storage):
Frame communication
Internal Tone Generators
Standards Supported (SDI)
BNC SDI Video Inputs/Outputs
9931-EMDE-OM (V1.17)
• 9931-EMDE 3G/HD/SD-SDI Embedder/De-Embedder
• 9931-EM 3G/HD/SD-SDI Embedder
• 9931-DE 3G/HD/SD-SDI De-Embedder
Intended for installation and usage in frame meeting openGear
modular system definition.
28 Watts (nominal)
The following options add power consumption as follows:
®
• +DEC (Dolby decoder) option: 2 Watts
• +ANA, +ANV (analog audio/video I/O) options: 15 Watts (typical)
32° – 104° F (0° – 40° C)
< 95%, non-condensing
10/100 Mbps Ethernet with Auto-MDIX.
Eight built-in tone generators, each configurable for 18 discrete sine
wave frequencies ranging from 50 Hz to 16 kHz.
Generator source signal level is equivalent to -20 dBu.
3G: SMPTE 425 level A
1080p60, 1080p59.94, 1080p50
HD: 1080i60, 1080i59.94, 1080i50, 1080p29.97, 1080p25, 1080p24;
1080p23.98
720p60, 720p59.94, 720p50, 720p29.97, 720p25, 720p24,
720p23.98
SD: 486i59094, 576i50
Input/Output Complement:
• One BNC input connector
• Four BNC output connectors
Data Rates Supported:
SMPTE 425 level A and B: 3 Gbps
SMPTE 292 HD-SDI: 1.485 Gbps or 1.485/1.001 Gbps
SMPTE 259M-C SD-SDI: 270 Mbps
BNC Connector Input/Output Impedance:
75 Ω terminating
Cable Equalization (3G):
394 ft (120 m) Belden 1694A
Cable Equalization (HD):
591 ft (180 m) Belden 1694A
Cable Equalization (SD):
1050 ft (320 m) Belden 1694A
Return Loss:
> 15 dB up to 1.485 GHz
9931-EMDE PRODUCT MANUAL
Technical Specifications
Characteristic
®
1-27