Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 67

Operating Instructions
Table 3-2 9931-EMDE Function Menu List — continued
Timecode
Shown below is an example in which received SDI video with SDI VITC waveform timecode is to be converted to SDI
ATC_VITC timecode data. Each Timecode control is fully described on the pages that follow.
525i 5994
w/ VITC
Waveform
A
Noting that the incoming video contains VITC
waveform timecode data (as shown in the status
display), set the Source Priority drop-down lists to
include VITC Waveform timecode data (SDI VITC) as
a choice. This extracts VITC Waveform timecode
data from the incoming video.
B
In this example, it is desired to provide SD ATC_VITC
timecode data in the output video. As such, set
SD ATC VITC Insertion to Enabled.
In the example here, the line numbers are set to the
default SMPTE 12M-2-2008 recommended value.
525i SDI
w/ VITC
Waveform
9931-EMDE-OM (V1.17)
525i 5994
9931-EMDE
w/ ATC_VITC
Reference VITC
Detect/Extract
A
SDI VITC
Detect/Extract
SDI ATC_VITC
Detect/Extract
SDI ATC_LTC
Detect/Extract
Free Run
(Internal Count)
9931-EMDE PRODUCT MANUAL
9931-EMDE Function Menu List and Descriptions
Provides timecode data extraction from various
sources, and provides formatting and re-insertion
controls for inserting the timecode into the output video.
A
Priority/
Select
Buffer/
Format
Insert
Control
Line
Number
Control
SDI VITC
Timecode
Proc/Embed
ATC_VITC
B
Timecode
Proc/Embed
ATC_LTC
Timecode
Proc/Embed
525i SDI
w/ATC_VITC
ATC_VITC Insertion = Enabled
ATC_VITC = Line 13 (default SMPTE 12M-2)
3-15