Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 110

3
The routing required to get all channels shown in
Routing/Controls tab (as shown to the right for this example). All signals coming into the card must first be placed on the bus to be
accessed by card DSP functions, or to be outputed.
A
Network
Program
Audio; Main
(de-embedded
from SDI IN)
Network
Program
Audio; SAP
(de-embedded
from SDI IN)
Local
D
Insertion
Audio
(AES pair 1)
E
EAS Audio
(AES pair 2)
Because AES pair 1 (Local Insertion Audio) and AES pair 2 (EAS Audio)
(AES Ch 1 thru AES Ch 4) are to be used as inputs for the routing in this
example, AES Ch 1 thru AES Ch 4 must be set as AES Input on the
Output Audio Routing/Controls > AES Audio Out tabs as shown.
3-58
A D
,
Audio Bus
Input Routing/
Controls
Embed Ch 1
Embed Ch 2
Embed Ch 3
Embed Ch 4
Embed Ch 5
Embed Ch 6
Embed Ch 7
Embed Ch 8
AES Ch 1/2
AES Ch 3/4
Figure 3-7 Audio Routing Example (Sheet 2 of 5)
9931-EMDE PRODUCT MANUAL
9931-EMDE Function Menu List and Descriptions
E
and into the card processing is accomplished using the Audio Bus Input
Bus Ch 1
Bus Ch 2
Bus Ch 3
Bus Ch 4
Bus Ch 5
Bus Ch 6
Bus Ch 7
Bus Ch 8
Bus Ch 9
Bus Ch 10
Bus Ch 11
Bus Ch 12
9931-EMDE-OM (V1.17)