Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 78

3
Table 3-2 9931-EMDE Function Menu List — continued
• Input Triggering Controls
• Output Enable Controls
• Output Status Displays
• AFD Output Line Control
3-26
9931-EMDE Function Menu List and Descriptions
(continued)
Individual ARC format input controls allow accepting or rejecting received
ARC formats as follows:
• Trigger on AFD:
• Off rejects AFD-coded triggering.
• On allows trigger on AFD.
• Trigger on WSS:
• Off rejects WSS-coded triggering.
• AFD allows triggering on AFD-coded WSS.
• ETSI allows triggering on ETSI-coded WSS.
• Trigger on VI:
• Off rejects VI-coded triggering.
• AFD allows triggering on AFD-coded WSS.
• SMPTE allows triggering on SMPTE-coded WSS.
Note: If multiple formats are present on the input video, AFD preempts
other formats, followed by WSS or VI (as set by the
WSS/VI Priority control).
Individual ARC format input controls allow accepting or rejecting received
ARC formats as follows:
• AFD Output:
• Disable turns off AFD format on output.
• Enable inserts AFD packet on output, and allows changing line
number.
• Follow Input Line inserts AFD packet on same line as received AFD
line number (where applicable).
• WSS Output:
• Disable turns off WSS format on output.
• AFD Enabled inserts AFD-coded WSS on output.
• ETSI Enabled inserts ETSI-coded WSS on output.
• VI Output:
• Disable turns off WSS format on output.
• AFD Enabled inserts AFD-coded VI on output.
• SMPTE Enabled inserts SMPTE-coded VI on output.
Displays the current output status, coding, and H/V ratio for AFD, WSS,
and VI formats.
• If a format is active and enabled (as set with the Output Enable
controls), the code and H/V description is displayed.
• If a format is not outputting data, Disabled is displayed.
Note: • The code displayed shows the outputted code. If the code is
modified by user settings performed in the AFD Map sub-tab,
these changes are shown here. Refer to AFD Map sub-tab for
more information.
• As shown in the example, settings that result in invalid mapping
across format translations will display Disabled. In these cases,
no output is inserted for the format.
Allows selecting the line location of the AFD data within the video signal
Ancillary Data space.
Note: • The card does not check for conflicts on a given line number.
Make certain the selected line is available and carrying no other
data.
• For progressive formats, the Field 1 control serves as the line
number control.
9931-EMDE PRODUCT MANUAL 9931-EMDE-OM (V1.17)