Introduction
Table 1-1
9931-EMDE Video/Audio Signal Types — continued
Signal ID
SDI OUT A
Note: The input/output complement listed above and shown in Figures 1-2 and 1-5 represents the maximum capability of the
9931-EMDE. The practical input/output complement is determined by the particular Rear Module used with the 9931-EMDE.
Not all options are available concurrently on a single card.
9931-EMDE Video and Audio Options
Table 1-2
9931-EMDE Video/Audio Options
Option
Note: Options are periodically added for this card. Check for latest options on the card web page at cobaltdigital.com. Most
options, in addition to licensing, require that card be loaded with the latest available firmware.
Video Options
Color Correction
Audio Options
®
Linear Acoustic
Loudness
Processing software
OGCP Loudness Meter
software
(Note 1)
®
Linear Acoustic
Upmixing
software
(Note 2)
Automatic Downmixing
9931-EMDE-OM (V1.17)
Description
3G/HD-SD-SDI BNC video output
In addition to the I/O options described in Table 1-1 above, the 9931-EMDE
offers several video and audio options described in Table 1-2. Note that
several options also require a rear I/O option that supports the video and/or
audio options described here; the complete option requirement is specified in
Table 1-2.
Description
In addition to standard video proc controls,
provides independent RGB channel controls
for luma, black, and gamma.
®
Linear Acoustic
AEROMAX
stereo audio output loudness processing;
several combinations available
5.1-channel loudness meter in accordance with
EBU R128, ATSC A/85 and ITU BS.1770.
Allows OGCP-9000 to provide user interface.
®
Linear Acoustic
AUTOMAX™ converts legacy
stereo program audio (from any source
received by the card) to 5.1-channel audio.
Provides a stereo downmix from selected
alternate multi-channel sources if selected
primary L/R channels lose signal.
9931-EMDE PRODUCT MANUAL
9931-EMDE Functional Description
Standard
❑ Various Rear Modules offer various
SDI BNC output complements.
See 9931-EMDE Rear Modules
(p. 2-7) for more information.
Option/Rear Module Package
• Option +COLOR
®
5.1-channel or
• Option +LP51 (5.1-Ch loudness
processing)
• Option +2LP20 (dual independent
stereo loudness processing)
• Option +LP20 (stereo loudness
processing)
• Option +LM
• Option +UM
• Option +ADM
Option/Rear Module
Package Required
Required
1-7