Cobalt Digital Inc 3G Fusion 9931-EMDE Product Manual page 101

Operating Instructions
Table 3-2 9931-EMDE Function Menu List — continued
COM and Metadata Routing
•
Note:
"Dolby Decoder" drop-down choices and "Dolby Encoder" selector for this function appear only on cards equipped with
a Dolby decoder and/or Dolby encoder.
•
After familiarizing yourself with the controls described here, see the following page for an example showing
interrelated use of these controls.
• Serial Port Selectors
• VBI SMPTE 2020 Embedding Source
Selector
• SDI Input VBI Metadata Status Display
9931-EMDE-OM (V1.17)
9931-EMDE Function Menu List and Descriptions
Provides input and output support of Dolby metadata
routing between optional Dolby encoder/decoder and
serial/video interfaces.
For serial ports 1 and 2, selects the source for metadata to be exported
(outputted) from the card over a port as shown from the choices listed to
the left and shown below. (None selection frees the port to be used as an
input.)
Dolby
Decoder
Note: If settings here and described below attempt to set a given port
as both an output and an input, Serial Ports Conflict status
display indicates conflict (e.g., "Port 1 configured as both input
and output".)
For VBI embedding at the card SDI output, selects the source of
metadata to be exported (outputed) from the card from the choices
listed to the left and shown below.
Serial Port 1
Serial Port 2
Dolby
Decoder
Input Video (VBI metadata)
Indicates if Dolby metadata is present on input SDI VBI, as well as VBI
line number. (If no metadata present, displays "Not Present".)
9931-EMDE PRODUCT MANUAL
Dolby Decoder
Input Video (VBI metadata)
(Input)
None
Port 1 as
output
Output SMPTE
2020 VBI
metadata
embedding
3-49