Troubleshooting - Axis AT1912KIT Manual

Bluetooth Operation
Pairing
On your mobile phone, open the Bluetooth settings and search for the Bluetooth device
ID "AT1902BT" in the device list. Select "AT1902BT" and then input the password "0000".
When successfully paired, the BT icon will be displayed on the LCD.
Bluetooth Audio
Press the SRC button to switch to BT MUSIC mode. The unit will play songs from your
mobile phone. Press the
the next/or previous song.
Disconnect the Bluetooth
While your mobile phone is paired with the unit, if you want to disconnect the Bluetooth in
BT MUSIC mode, press and hold the
Press and hold the
TROUBLE SHOOTING
Before going through the checklist, check the wiring connections. If any of the problems
persist after going through the checklist, consult your nearest service dealer.
Symptom
No power.
No sound.
The operation keys do not work.
No/weak reception
key to pause/play the song. Press the
button for 2 seconds to disconnect the Bluetooth.
button after disconnecting to manually reconnect.
Cause
The car ignition switch is not on.
The fuse is blown.
Volume is low/muted.
Wiring is not properly connected.
The unit is frozen.
The antenna cable is not connected.
The signals are too weak.
The amplified antenna has no power.
/ button to select
Solution
If the ACC wire is connected to the
cars accessory circuit, but the engine
is not running, switch the ignition key
to "ACC".
Replace the fuse.
Adjust volume to a desired level.
Check wiring connection.
See page 5 "Reset the Unit".
Insert the antenna cable firmly.
Select a different station manually.
Connect the power wire on
the antenna.
7