Table of Contents
Advertisement
TROUBLESHOOTING
SYMPTOM
No Response
1. Check all power connections.
2. Check power is on.
No Sound
1. Check whether the volume is on the main position or in Mute.
2. No sound from Unit: Check if FM or IR transmit status has been
3. No sound from IR Headphones: Check if IR transmit status has
4. No sound outputs in the following: Pause/Fast Forward/
5. Resume default via setup system.
Image
1. Check whether the player is in line input state.
2. Check whether the brightness setup is appropriate.
Disc cannot
1. Check whether a disc has been correctly loaded with label side
be read
2. The disc is damaged or dirty. Please load another disc or clean.
3. Adjust the region code of disc to match the player.
4. If the disc format is wrong, change to compatible format.
Improper
1. Set up the TV system once again.
image size
2. Select the corresponding screen format from the setup menu.
Track cannot
1. Some sections of some discs do not permit a selection.
be selected
The remote
1. Check whether there exists any barrier between the remote
is not working
2. Point in a line straight to the player.
3. Check the battery is installed correctly.
4. Replace battery if needed.
selected. Select FM OFF and turn off IR Audio output function.
been selected. Turn ON IR Audio output function.
Fast Reverse/Stop.
Press DVD/AV to switch to DVD state.
facing the user.
control and the player.
SOLUTIONS
17.
Advertisement
Table of Contents
