KMC Controls BAC-19 FlexStat Series Application Manual page 10

Setpoint Options
System
Configuration
Options
Setpoint
Configuration
Options
Enable/Disable System
and Communications
Menus on the Display
NOTE: See Settings on page 3
BAC-19xxxx FlexStat Application Guide
Setpoints Tab
Advanced Tab
NOTE: If disabled, system
Options Tab
for explanations of options. After saving changes, restart the FlexStat.
10
or communication
options can then
only be changed in
software.
NOTE: One setpoint
can be
disabled if
the FlexStat
is used for
only cooling
or only
heating.
AG200824A