Useful Advice; Maintenance And Cleaning - Black & Decker CJ650 Manual

1. Fit the jug (5) onto the motor base (6), turn it
anti-clockwise to lock it onto the motor base.
2. Clip the required reamer (2 or 3) into the
adjustable pulp strainer (4).
3. Place the reamer / adjustable pulp strainer
assembly over the spindle of the motor base
ensure that the handle on the pulp strainer
slots in to the handle of the jug.
Note: With the adjustable pulp strainer in place
you can adjust the grade of the strainer by
moving the pulp strainer handle left and right.
This allows you to alter the amount of pulp you
will get in your juice.
Use
• Prepare the fruit by rolling it gently between
the hands for a moment or two then cut it in
half.
• Connect the appliance to a suitable electrical
supply.
• Press the cut face onto the reamer. Pressing
on the reamer will start the motor in the base.
The reamer will rotate, cutting into the fruit
and the juice will flow into the jug.
Note: Ensure fingers & hands do not touch the
reamer during operation. Never allow loose
clothing, jewelery, hair, etc. to come in contact
with moving parts.
• The juicer will automatically stop once you
stop applying downward pressure on the
reamer (2) with the fruit.
• Once juicing is completed, the lid (1) can be
placed over the unit.
• The jug (4) can be removed & used to serve
the juice.
The appliance should be
disconnected from the mains supply
before removing the jug.
After 3 minutes of use, the Juicer should be
allowed to cool completely before further use.

Useful advice

• Choose fresh, ripe fruit as they will yield
more juice.
• Drink the juice immediately after you have
extracted it. If it is exposed to air for some
time, the juice will lose its taste and
nutritional value.
Maintenance & cleaning
• The appliance is easier to clean if you do so
immediately after use.
• Do not use abrasive cleaning agents,
scourers, acetone, alcohol etc. to clean the
appliance.
• All detachable plastic parts are
dishwasher-safe.
ENGLISH
5