LeCroy LW110 User Manual page 164

ArbExplorer 5-14
the third etc. The second alternative is to use what ArbExplorer has
offer and that is to make up one long waveform that contains many
sm aller segments, download it to the instrument in one shot and the
dow nload a segment table that splits the entire waveform memory in
the required segment sizes.
Want to use it? Here is how it is done.
Click with your mouse on the To Segment Table button. A dialog box
as shown in Figure 5-6 will pop up.
Figure 5-50. The Segment Table
The Channel field lets you select the active channel. If "1" is
displayed, then the table you'll be constructing will affect channel 1.
Likewise, select "2" if you want to program the table for channel 2.
The two main fields in the segment table are Seg and Length. The
Seg (segment) is an index field,
4096. The Length is always associated with the segment number.
You can program any segment length from 16 to 4 Meg provided that
the sum of the length for all programmed segments does not exceed
your purchased waveform memory size.
Use the Append key to add a segment at the end of t
Use the Insert key to insert a segment at the cursor location. The
Delete key is used for deleting a segment at the cursor position.
The Clear All key will remove all segments from the table and will let
User Manual LW120
which can have values only, from 1 to
he segment list.
to
n
to