LeCroy LW110 User Manual page 115

User Manual LW120
SINC:NCYCle?
Response and default
The LW120 will return the present number of zero-crossing value. Default value is 10.
GAUSsian:EXPonent<exp>
Purpose
This command programs the exponent for the standard gaussian pulse waveform. This command has no
affect on arbitrary waveforms.
•
<exp > sets the exponent parameter
Parameter type
Numeric
Parameter range
<exp> 10 to 200
GAUSsian:EXPonent?
Response and default
The LW120 will return the present exponent value. Default value is 20.
EXPonential:EXPonent<exp>
Purpose
This command programs the exponent for the standard exponential waveform. This command has no affect
on arbitrary waveforms.
•
<exp > sets the exponent parameter
Parameter type
Numeric
Parameter range
<exp> -100 to 100
EXPonential:EXPonent?
Response and default
The LW120 will return the present exponent value. Default value is –20.
DC<%_amplitude>
Purpose
This command programs the amplitude of the standard DC waveform. This command has no affect on
arbitrary waveforms.
•
<%_amplitude > sets the dc level as percentage of the programmed amplitude setting
Parameter type
Numeric
Parameter range
<%_amplitude> -100 to 100 in units of percent
DC?
Response and default
The LW120 will return the present dc value. Default value is 100.
Remote Programming Reference 4-33