LeCroy LW110 User Manual page 124

TRIGger:BURSt{OFF|ON|0|1}
Purpose
This command will set the burst mode. This command will affect the LW120 only after it will be set to
interrupted operation with the command INIT:CONT OFF.
•
ON or 1 will set the burst mode on
•
OFF or 0 will set the burst mode off
Parameter type
Discrete
TRIGger:BURSt?
Response and default
The LW120 will return 1 if the burst is on, or 0 if the burst is off. Default value is 0.
TRIGger:COUNt<count>
Purpose
This command will set the burst counter.
•
<count> will set the count number
Parameter type
Numeric (integer only)
Parameter range
<count> 1 to 1 Meg
TRIGger:COUNt?
Response and default
The LW120 will return the present count value. Default value is 1.
TRIGger:GATE{OFF|ON|0|1}
Purpose
This command will set the gate mode. This command will affect the LW120 only after it will be set to
interrupted operation with the command INIT:CONT OFF.
•
ON or 1 will set the gate mode on
•
OFF or 0 will set the gate mode off
Parameter type
Discrete
TRIGger:GATE?
Response and default
The LW120 will return 1 if the gate is on, or 0 if the gate is off. Default value is 0.
TRIGger:SLOPe{POSitive|NEGative}
Purpose
This command will set the edge sensitivity for the trigger input.
•
<POSitive> will set the positive edge
•
<NEGative> will set the negative edge
Remote Programming Reference 4-42
User Manual LW120