LeCroy LW110 User Manual page 114

<delay> 0 to 99.9 in units of percent
RAMP:DELay?
Response and default
The LW120 will return the present delay value. Default value is 0.
RAMP:TRANsition<rise>
Purpose
This command programs ramp transition from low to high of the standard ramp waveform. This command
has no affect on arbitrary waveforms.
•
<rise> sets the rise time parameter
Parameter type
Numeric
Parameter range
<rise> 0 to 99.9 in units of percent
RAMP:TRANsition?
Response and default
The LW120 will return the present rise time value. Default value is 60.
RAMP:TRANsition:TRAiling<fall>
Purpose
This command programs ramp transition from high to low of the standard ramp waveform. This command
has no affect on arbitrary waveforms.
•
<fall> sets the fall time parameter
Parameter type
Numeric
Parameter range
<fall> 0 to 99.9 in units of percent
RAMP:TRANsition:TRAiling?
Response and default
The LW120 will return the present fall time value. Default value is 30.
SINC:NCYCleN_cycles>
Purpose
This command programs the number of "0-crossings" of the standard SINC pulse waveform. This command
has no affect on arbitrary waveforms.
•
<N_cycle> sets the number of zero-crossings parameter
Parameter type
Numeric (integer only)
Parameter range
<N_cycle> 4 to 100 zero crossings
Remote Programming Reference 4-32
User Manual LW120