Buttons And Liquid Crystal Display Screen (M3097G+); Messages - Fujitsu M3097E Plus Operator's Manual

2.3.3 Buttons and liquid crystal display screen (M3097G+)

2.3.4 Messages

Liquid crystal display screen: Displays messages only.
The mode buttons have the following functions:
Mode 1 button: See Section 5.3.4, 5.4 and 5.5.
Mode 2 button: See Section 5.3.4, 5.4 and 5.5.
When error messages are displayed on liquid crystal
display screen, press this button to enable the read
operation.
Error messages (temporary errors)
If a temporary error occurs in the scanner, one of the following mes-
sages is displayed.
P a
This message is displayed if there is no more paper on the
ADF paper chute during a read operation in ADF mode.
Fill the ADF paper chute with paper. To enable the read
operation, for the M3097E+, press the stop button, for the
M3097G+, press the Mode 2 button.
P
This message is displayed if a document is jammed in the
ADF. See section 5.1 for removing jammed documents.
A D F –
This message is displayed if the ADF is not closed
completely. Close the ADF completely, and enable the
read operation.
L a m p
P o
This message is displayed if the ADF is open for lamp
replacement when the power is on. Turn off the power,
and close the ADF completely.
p e r E m p t y
a p e r J a m
C o v e r O p
– C o v e r O
w e r O f f ! !
e n
p e n