Fujitsu M3097E Plus Operator's Manual page 25

(M3097G+)
Connect the interface cables to the interface connectors and fasten the cables
with the catches. Connect the other ends of the cables to the host system. If the
image scanner is at the terminal side, connect the terminator.
Back of the image scanner
Catches
NOTICE
3 – 4
Catches
Interface cables
Use shielded interface cables to prevent harmful interferance or
avoid receiving interferance that may cause undesired operation.
Terminator
If the image scanner is at
the terminal side, connect
To the
the terminator to the
host
connector to which an
system
interface cable is not
connected.